Wally Dolly Basic Dolly 12 ft Kit & Walkabout Hard Case Bundle

Click on picture to view larger

Wally Dolly Basic Dolly 12 ft Kit & Walkabout Hard Case Bundle

Complete Portable 12 ft Track Solution Supports Tripods with up to 80 lb Loads Basic Dolly Kit with 9 ft Track & Bag 3 ft Track Extension Waterproof Walkabout Hard...

Regular price Rs. 328,600.00 Sale price

Actual Price Rs. 410,750.00

SPECIAL OFFER TILL MIDNIGHT OF APRIL 30th FLAT 10% DISCOUNT

Coupon Code: EXPERIENCE10

Valid on selected products where you see this message. Valid for 1 order per customer. Valid on first come first serve basis for first 500 orders.

Share
  • Complete Portable 12 ft Track Solution
  • Supports Tripods with up to 80 lb Loads
  • Basic Dolly Kit with 9 ft Track & Bag
  • 3 ft Track Extension
  • Waterproof Walkabout Hard Case
  • Polyurethane Dolly Wheels
  • End Stops for Single User Operation
  • Supports Optional WD 100mm Bowl Adapter
  • Anodized Aluminum Track
  • Works on Flat / Hard Surfaces

This bundle includes the Wally Dolly Basic Dolly Kit with 9 ft Track & Bag , 3 ft Track Extension , and the Walkabout Hard Case , providing a complete portable 12 ft track solution for tripods with up to 80 lb loads.

Conveniently carry everything to the set in the hard case, and then unpack and set up a 12 ft long linear track on flat surfaces. Attach your tripod to the included T-Section dolly as you would attach it to a ground spreader, and then smoothly slide it along the length of the track. The T-Section dolly rides along the track on polyurethane wheels that provide for a smooth tracking with no bouncing or squeaks. The track includes end stops that are especially useful when one person is operating both the dolly and camera. The T-Section dolly also features a mounting hole supporting the optional Wally Dolly Low Boy 100mm bowl adapter.

When you're done, the T-Section dolly easily breaks down into two pieces, the 9 ft track into six pieces, and the extension track into two pieces, and all these components neatly fit into the hard case, which is injection-molded and waterproof.

  • Complete Kit with 12' Track & Bag

    The Wally Dolly Complete Kit with 12' Track & Bag provides you with the components to create smooth dollies on hard surfaces with no bumps along the track joins and minimal track squeaks. The included T-section tripod carriage supports up to eighty pounds of equipment, allowing you to use cameras from compact camcorders up to full-sized ENG cameras. The T-shaped dolly mounts to your tripod in place of a ground spreader, securing the legs. This puts the center of the tripod close to one side of the tracks, so take that into consideration when choosing which side to put the T-section on.

    The six polyurethane wheels ride on the included nine feet of track providing you a smooth ride with no pipe join bounces or squeaks. The dolly carriage breaks down into two easily assembled pieces for portability. It is pre-drilled to accept the included Wally Dolly Low Boy 100mm Tripod Head Mount, allowing you to get low angel shots not possible when using a standard tripod.

    The twelve feet of portable track comes as eight track pieces featuring anodized aluminum construction that reduces squeaks and track noise when used with the Wally Dolly T-Section tripod carriage. The kit includes two track end stops, which can help prevent the dolly from rolling off the end of the track. The end stops are particularly useful when one person is operating both the dolly and camera, but are also appreciated by safety minded dolly grips. It includes two nine foot track pads, two three foot track pads, and a carry bag. Each 3' section of track features male and female acetal screw joins for quickly connecting sections of track together. The acetal ends are replaceable in the unlikely event they are damaged.

    T Section Tripod Carriage

    The T Section Tripod Carriage is designed to ride on the included 1.25" O.D. anodized aluminum track from Wally Dolly. This combination allows the carriage to smoothly transition across track joins and is tested to be extremely quiet.
    The carriage features four cup like indents on each arm to capture the feet of your tripod.
    The carriage breakdowns into two sections for portability.
    The carriage incorporates a mounting hole for the included Wally Dolly Low Boy, which is a 100mm bowl adapter.

    Track

    Anodized 6060 drawn aluminum tubes with a 1.25" outer diameter support the weight of the T Section tripod carriage and up to eighty pounds of optional tripod, camera, and accessories.
    Each piece of track has a male and female replaceable acetal screw plug, allowing you to join together multiple pieces of track by screwing them into each other. This can result in a nearly limitless track run, with purchase of sufficient track pieces.
    The track is designed to run through a standard Australian door opening (32") and lay on the included track pads.
    Please note that this track is meant to run on fairly smooth surfaces, and track joins must be supported. You can use the included track pads on hard or uneven surfaces, and you may skip the track pads when dollying on soft surfaces such as carpet.
    The included track ends provide safety and peace of mind, helping to prevent the dolly from running off the end of the track.
  • Walkabout Hard Case

    The Walkabout Hard Case from Wally Dolly is an injection molded mil-standard waterproof case and is molded from ultra-high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design. The hard case is custom designed and cut from high density foam inserts in an SKB military standard hard case. It allows for fast setup and pack-up. This unit is an alternative to putting the Wally Dolly soft case in a tripod tube. The Walkabout case will hold the Basic or the Complete Kit, 12' of track/pads and the Low Boy. The case is equipped with in-line skate style wheels, trigger release latches, and cushion grip handles.

    In-line skate style wheels for easy transport
    Trigger release latches can be retrofitted with TSA accepted key locking latches
    Padlock holes include stainless steel padlock protector clips
    Cushion grip handles on three sides
    Waterproof and dust tight design
    Molded-in hinge for added protection
    Molded-in hinge for added protection
    Ambient pressure equalization valve
    Resistant to UV, solvents, corrosion, fungus
    Resistant to impact damage
    Machine cut high density foam insert
    • Complete Kit with 12' Track & Bag
      Dolly
      Load Capacity 80 lb / 36.3 kg
      Track Span 22.5" / 57 cm
      Wheels 3 x Pair of polyurethane wheels
      Track
      Material of Construction Track: Anodized 6060 drawn aluminum
      Track Ends: Acetal
      Track Pads: Cordura fabric
      Diameter O.D.: 1.25" / 31.75 mm
      Length Each Segment: 36" / 0.91 m
      Width Track Pad: 6" / 15.2 cm
      Packaging Info
      Box Dimensions (LxWxH) 40.5 x 10.25 x 7.5"
    • Walkabout Hard Case
      Material Polypropylene copolymer resin
      Dimensions 44.96 x 16.98 x 6.34" (114.2 x 43.1 x 16.1 cm)
      Weight 17 lb (7.7 kg)
      Packaging Info
      Box Dimensions (LxWxH) 46.0 x 17.25 x 6.9"
      In the Box
      Bundle Items
      • T Section Tripod Carriage
      • 9' Track Extension Set with Bag
      • 3' Track Extension
      • Rope Ratchet
      • 2 x End Stops
      • Allen Key
      • Cleaning Cloth
      • Kit Bag
      • Limited 1-Year Warranty
      • Limited 1-Year Warranty
      All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
      Delivery is approximately 9-12 days from order date. To know more click here.
       Tanotis uses Payumoney as a payment gateway, We receive the amount paid by customer only when we deliver the product.
      1. You make the payment.
      2. Money is held with Payumoney.
      3. Money is released to us only when the product is delivered to you.