Tilta Advanced Kit for Blackmagic Design Pocket Cinema Camera 6K Pro (Tactical Gray)

The tactical gray Tilta Full Camera Cage for Blackmagic Design Pocket Cinema Camera 6K Pro is a modular, formfitting cage that protects and enables accessory mounting for your camera. This cage features one NATO rail, one single-rod bracket mount, two ARRI-style rosettes, three shoe mounts, and multiple 1/4"-20 and 3/8"-16 threaded mounting holes for accessories. The bottom plate features Arca-style compatibility and multiple mounting holes for attaching to a tripod or gimbal.

Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight tactical gray Quick Release Top Handle from Tilta. The quick release handle's features include two shoe mounts, a 15mm rod port, multiple 1/4"-20 and 3/8"-16 threads, and a 3/8"-16 thread with locating pins.

The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8"-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.

Add a solid-state drive to your Blackmagic Design Pocket Cine Camera 4K with this Tactical gray Samsung T5 SSD Holder from Tilta. The aluminum and stainless steel holder is designed to snugly fit the Samsung T5 SSD, which is secured with a thumbscrew. The holder attaches to the cage with the included screws, and there are screws included to attach the separately available partial sun hood to protect your LCD monitor from sunlight and glare.

The Tilta Left-Side Advanced Power Handle, in tactical gray, attaches to the left side of Tiltaing camera cages using your choice of an optional rail/rosette mounting bracket�Tilta Left-Side Adapter Type IV, V, or VI. The handle accepts a Sony F570 battery (sold separately) and features two power outputs for running accessories off the battery. It offers an 8V USB Type-C output port and 12 VDC port. In addition to this, the Advanced Power Handle provides a run/stop button for controlling record start/stop on compatible cameras over an optional R/S cable connection.

The Advanced Left-Side Handle Adapter Type VI from Tilta enables you to mount a Tiltaing Left-Side Wooden Handle to the NATO rail mount on select Tilting camera cages. This Tilta gray Type VI adapter is constructed of aluminum and stainless steel and comes with an Allen key.

Compatibility

NATO Rail Mount

The tactical gray Tiltaing 15mm LWS Baseplate Type VI from Tilta provides 15mm LWS rod mounting, dual ARRI-style handgrip rosettes, and more for the Tiltaing BMPCC 6K Pro Camera Cage. This versatile baseplate is compatible with Tilta-standard dovetails and incorporates a slot for the Tilta M2 SSD Case.

Make it easier to plug in your camera's HDMI cable when using Tilta's Blackmagic Design Pocket Cinema Camera 4K cage with this HDMI Right-Angle Adapter. The adapter is designed at a 90° angle and attaches to the corner of the cage with a thumbscrew. This puts the male HDMI type A connector in place to plug into your camera, and the female HDMI type A end remains unimpeded.

The 12" 90° USB Type-C Cable for BMPCC 4K Cage from Tilta is designed to closely fit your Blackmagic Pocket Cinema Camera 4K when mounted on its Tilta cage. Features include right-angle USB Type-C connectors with thumbscrew anchors on each end.

Features

Tilta's 12" Threaded 15mm Rod is a 12" rod with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rod, while the end with the straight cut makes for a smoother rod join.

The rod is made from machined aluminum for a balance between weight and strength, and then anodized black for wear and corrosion resistance. Please note that there is no industry-wide standard for support rod threading, so when sourcing optional rod extenders, it is best to stay within one brand.