Texas Instruments TPS62067DSGT TPS62067DSGT DC-DC Switching Buck Step Down Regulator Adjustable 2.9V-6Vin 800mV-6Vout 2Aout WSON-8

The TPS62067DSGT is a highly efficient synchronous step-down DC-to-DC Converter for use with point of load (POL). It provides up to 2A output current. With an input voltage range of 2.9 to 6V, the device is a perfect fit for power conversion from a 5 or 3.3V system supply rail. The TPS6206x operates at 3MHz fixed frequency and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range. The power save mode is optimized for low output voltage ripple. For low noise applications, TPS62065 can be forced into fixed frequency PWM mode by pulling the MODE pin high. TPS62067 provides an open drain power good output. In the shutdown mode, the current consumption is reduced to less than 1µA and an internal circuit discharges the output capacitor. TPS6206x family is optimized for operation with a tiny 1µH inductor and a small 10µF output capacitor to achieve smallest solution size and high regulation performance.

• Power good output
• Output voltage accuracy in PWM mode ±1.5%
• Output capacitor discharge function
• 100% Duty cycle for lowest dropout
• Voltage positioning
• Clock dithering
• Supports maximum 1mm height solutions
• Up to 97% efficiency
• 18µA Typical quiescent current
• Green product and no Sb/Br

Applications

Power Management, Computers & Computer Peripherals, Portable Devices

Other details

Brand	TEXAS INSTRUMENTS
Part Number	TPS62067DSGT
Quantity	Each (Supplied on Cut Tape)
Product Change Notice EN

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.