Texas Instruments SN65HVD1782DR SN65HVD1782DR RS485 Transceiver Half Duplex 1 Driver up to 10 Mbps ESD Protection 3.15 V 5.5 SOIC-8

The SN65HVD1782DR is a RS-485 Fault-protected Transceiver designed to survive over-voltage faults such as direct shorts to power supplies, mis-wiring faults, connector failures, cable crushes and tool mis-applications. The device is also robust to ESD events with high levels of protection to the human-body-model specification. The SN65HVD178x device combines a differential driver and a differential receiver, which operate from a single power supply. In the SN65HVD1782, the driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. This port features a wide common-mode voltage range, making the device suitable for multipoint applications over long cable runs. This device is pin-compatible with the industry standard SN75176 transceiver, making them drop-in upgrades in most systems.

• Reduced unit load for up to 320 nodes
• Failsafe receiver (bus open, bus shorted and bus idle)
• Low power consumption
• 10Mbps Maximum signalling rate
• ±16kV HBM protection on bus pins
• 1µA Maximum low standby supply current
• 4mA Quiescent current during operation
• Green product and no Sb/Br

Applications

Automation & Process Control, Sensing & Instrumentation, Communications & Networking

Other details

Brand	TEXAS INSTRUMENTS
Part Number	SN65HVD1782DR
Quantity	Each (Supplied on Cut Tape)
Product Change Notice EN

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.