{"product_id":"sparkfun-u-blox-zed-f9p-neo-d9s-combo-breakout","title":"SparkFun u-blox ZED-F9P NEO-D9S Combo Breakout","description":"\u003cp\u003eWith GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! Our versatile combo breakout pairs the u-blox ZED-F9P multi-band high precision GNSS module with the NEO-D9S L-band GNSS correction data receiver. With a clear view of the sky, especially a clear view to the South, this combo breakout will deliver centimeter-level accuracy positioning without needing separate RTK or NTRIP corrections!\u003c\/p\u003e \u003cp\u003eThe ZED-F9P NEO-D9S combo board raises the bar for high-precision GPS and is one of a line of powerful RTK boards featuring the ZED-F9P module from u-blox. The ZED-F9P is a top-of-the-line module for high accuracy GNSS and GPS location solutions that is capable of centimeter-level three-dimensional accuracy. With this board, you will be able to know where your (or any object's) X, Y, and Z location is to better than an inch, without needing a separate correction source!\u003c\/p\u003e \u003cp\u003eWe've paired the ZED-F9P with the NEO-D9S-00B satellite data receiver for L-band correction broadcast. The NEO-D9S can be configured for use with a variety of L-band correction services including u-blox's PointPerfect service. It decodes the satellite transmission and outputs a correction stream directly to the ZED-F9P via UART2, enabling the ZED-F9P to reach accuracies down to centimeter level straight out of the box!\u003c\/p\u003e \u003cp\u003eWe've equipped the combo board with two USB-C connectors, one for the ZED-F9P and one for the NEO-D9S, so you can hook the board to your laptop and configure both devices using u-blox u-center if you want to. We've also equipped the combo board with two Qwiic connectors, so you can connect it quickly and easily to your favorite development board and control it using our sophisticated u-blox GNSS Arduino Library. The ZED-F9P and NEO-D9S share a single SMA antenna connection thanks to a miniature surface-mount power divider (antenna splitter) and 3.3V power is provided for an active antenna. If that wasn't enough, we've provided breakout pads for the I\u003csup\u003e2\u003c\/sup\u003eC, UART1 and UART2 ports on both devices. The UART2 pins are inter-connected (crossed-over) by default so the NEO-D9S can feed corrections directly to the ZED-F9P, but you can isolate them if you want to by opening the jumper links.\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/sparkfunx.github.io\/u-blox_ZED-F9P_NEO-D9S_Combo_Breakout\" class=\"btn btn-default\"\u003eGet Started With the SparkX ZED-F9P NEO-D9S Combo Breakout Product Manual\u003c\/a\u003e \u003c\/div\u003e \u003chr\u003e \u003cdiv class=\"alert alert-warning\"\u003e\n\u003cb\u003ePlease note:\u003c\/b\u003e the u-blox Thingstream PointPerfect Correction Service is only available to \"B2B Customers\" (Business To Business Customers). Please check the \u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/2\/5\/a\/4\/f\/Service_Terms.pdf\"\u003eService Terms\u003c\/a\u003e before purchasing hardware.\u003c\/div\u003e \u003cdiv class=\"alert alert-warning\"\u003e\n\u003cb\u003ePlease note:\u003c\/b\u003e the u-blox Thingstream PointPerfect Correction Service is currently only available in the USA's 48 contiguous states and in Europe. Please see the \u003ca href=\"https:\/\/cdn.sparkfun.com\/r\/600-600\/assets\/2\/e\/7\/0\/2\/SparkFun_RTK_Facet_L-Band_Coverage_Map.jpg\"\u003ePointPerfect coverage map\u003c\/a\u003e for more details.\u003c\/div\u003e \u003cdiv class=\"alert alert-warning\"\u003e\n\u003cb\u003eThis product requires a suitable L1\/L2\/L-band antenna:\u003c\/b\u003e be sure to check out the related products\/hookup accessories and pick a suitable antenna for your project.\u003c\/div\u003e \u003cdiv class=\"alert alert-warning\"\u003e\n\u003cb\u003eExperimental Product:\u003c\/b\u003e \u003ca href=\"https:\/\/www.sparkfun.com\/sparkx\"\u003eSparkX\u003c\/a\u003e products are rapidly produced to bring you the most cutting edge technology as it becomes available. These products are tested but come with no guarantees. Live technical support is not available for SparkX products. Head on over to our \u003ca href=\"https:\/\/forum.sparkfun.com\/viewforum.php?f=123\"\u003eforum\u003c\/a\u003e for support or to ask a question.\u003c\/div\u003e \u003chr\u003e \u003cp\u003e\u003cem\u003eThe \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun Qwiic Connect System\u003c\/a\u003e is an ecosystem of I\u003csup\u003e2\u003c\/sup\u003eC sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you canâ��t hook it up wrong.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eZED-F9P Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConcurrent reception of GPS, GLONASS, Galileo and BeiDou\u003c\/li\u003e \u003cli\u003eReceives both L1C\/A and L2C bands\u003c\/li\u003e \u003cli\u003eZED-F9P Current Consumption: 68mA - 130mA (varies with constellations and tracking state)\u003c\/li\u003e \u003cli\u003eTime to First Fix: 25s (cold), 2s (hot)\u003c\/li\u003e \u003cli\u003eMax Navigation Rate: \u003cul\u003e \u003cli\u003ePVT (basic location over UBX binary protocol) - 25Hz\u003c\/li\u003e \u003cli\u003eRTK - 20Hz\u003c\/li\u003e \u003cli\u003eRaw - 25Hz\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eHorizontal Position Accuracy: \u003cul\u003e \u003cli\u003e2.5m without RTK\u003c\/li\u003e \u003cli\u003e0.010m with RTK\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eOperational Limits \u003cul\u003e \u003cli\u003eMax G: ≤4G\u003c\/li\u003e \u003cli\u003eMax Altitude: 50km (49.7 miles)\u003c\/li\u003e \u003cli\u003eMax Velocity: 500m\/s (1118mph)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e1.5mAh battery backup for RTC\u003c\/li\u003e \u003cli\u003eDefault I\u003csup\u003e2\u003c\/sup\u003eC address: 0x42\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNEO-D9S Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConcurrent reception with L-Band Satellite\u003c\/li\u003e \u003cli\u003eReceives L-Band \u003cul\u003e \u003cli\u003e1525 MHz to 1559 MHz\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eTime to First Frame \u003cul\u003e \u003cli\u003e\u0026lt;10s @ 2400bps\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eUser Data Rates \u003cul\u003e \u003cli\u003e600, 1200, 2400, 4800 baud\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eVehicle Dynamics \u003cul\u003e \u003cli\u003eDynamics: +\/- 2g acceleration for all data rates (600 bit\/s, 1200 bit\/s, 2400 bit\/s, 4800 bit\/s)\u003c\/li\u003e \u003cli\u003eVelocity: Up to and including 300 km\/h\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eCurrent Consumption (Acquisition \u0026amp; Tracking): \u003cul\u003e \u003cli\u003ePeak: 130mA\u003c\/li\u003e \u003cli\u003eAverage: 35mA\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eDefault I\u003csup\u003e2\u003c\/sup\u003eC address: 0x43\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eBreakout Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eInput Voltage: 5V or 3.3V but all logic is 3.3V\u003c\/li\u003e \u003cli\u003e2x USB Type C Connector \u003cul\u003e \u003cli\u003eSeparate connectors for the ZED-F9P and NEO-D9S\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e2x Qwiic Connectors\u003c\/li\u003e \u003cli\u003eIntegrated SMA connector for use with a L1\/L2\/L-Band antenna of your choice \u003cul\u003e \u003cli\u003eOn-board power divider (antenna mux)\u003c\/li\u003e \u003cli\u003e3.3V power for an active antenna\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eLEDs \u003cul\u003e \u003cli\u003ePower\u003c\/li\u003e \u003cli\u003eRTK (Off: No Carrier Solution; Flashing: Floating Solution; On: Fixed Solution)\u003c\/li\u003e \u003cli\u003eGEO: Geofence\u003c\/li\u003e \u003cli\u003eTP: Timing Pulse (Pulse Per Second)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eJumpers \u003cul\u003e \u003cli\u003eLEDs x 4\u003c\/li\u003e \u003cli\u003eUART2: TX2-RX2 RX2-TX2\u003c\/li\u003e \u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC Pull-Up Resistors\u003c\/li\u003e \u003cli\u003eUSB Shield\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eBoard Dimensions \u003cul\u003e \u003cli\u003e1.70\" x 2.50\" (43.2mm x 63.5mm)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv class=\"alert alert-info\"\u003e\n\u003cb\u003eNote:\u003c\/b\u003e The I\u003csup\u003e2\u003c\/sup\u003eC address of the ZED-F9P is 0x42. The I\u003csup\u003e2\u003c\/sup\u003eC address of the NEO-D9S is 0x43. Both are software configurable. A multiplexer\/Mux is required to communicate with multiple ZED-F9P modules on a single bus. If you need to use more than one ZED-F9P module, consider using the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/16784\"\u003eQwiic Mux Breakout\u003c\/a\u003e.\u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSparkFun resources:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/sparkfunx.github.io\/u-blox_ZED-F9P_NEO-D9S_Combo_Breakout\"\u003eProduct Manual\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/d\/0\/4\/0\/Schematic.pdf\"\u003eSchematic\u003c\/a\u003e (PDF)\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/7\/0\/a\/2\/ZED-F9P_NEO-D9S_Combo_x02.zip\"\u003eEagle Files\u003c\/a\u003e (ZIP)\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/0\/3\/1\/e\/a\/Dimensions.png\"\u003eBoard Dimensions\u003c\/a\u003e (PNG)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_u-blox_GNSS_v3\"\u003eArduino Library - v3\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eu-blox resources:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/NEO-D9S_ZED-F9_Config_SPARTN_AppNote_UBX-22008160.pdf\"\u003eNEO-D9S and ZED-F9 configuration - SPARTN L-band correction data reception\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-blox u-center - GNSS evaluation software for Windows\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/pointperfect\"\u003ePointPerfect GNSS augmentation service\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/PointPerfect_ProductSummary_UBX-21024758.pdf\"\u003ePointPerfect Product Summary\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/developer.thingstream.io\/guides\/location-services\/pointperfect-service-description\"\u003ePointPerfect Service Description\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/developer.thingstream.io\/guides\/location-services\/pointperfect-service-description#h.jv0o1vz2wkn3\"\u003ePointPerfect Service Coverage\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/thingstream\"\u003eThingstream IoT service delivery platform\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/portal.thingstream.io\/\"\u003eThingstream Login\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/portal.thingstream.io\/register\"\u003eThingstream Registration\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":40531186581589,"sku":"20167:SPX-20167:spark","price":57615.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/ZED-F9P_NEO-D9S_Combo_Board-_01.jpg?v=1678247874","url":"https:\/\/www.tanotis.com\/products\/sparkfun-u-blox-zed-f9p-neo-d9s-combo-breakout","provider":"Tanotis","version":"1.0","type":"link"}