{"product_id":"sparkfun-rp2040-mikrobus-starter-kit","title":"SparkFun RP2040 mikroBUS Starter Kit","description":"\u003cp\u003eThe SparkFun RP2040 mikroBUSâ�¢ Starter Kit is designed to give you just what you need to start using the Click and Qwiic ecosystems side-by-side powered by Raspberry Pi! The core of this kit is designed around the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/18721\"\u003eSparkFun RP2040 mikroBUSâ�¢ Development Board\u003c\/a\u003e, the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/14532\"\u003eSparkFun Micro OLED Breakout (Qwiic)\u003c\/a\u003e, and the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/18823\"\u003eMIKROE Weather Click\u003c\/a\u003e. Additionally, to connect everything together we also include a \u003ca href=\"https:\/\/www.sparkfun.com\/products\/17259\"\u003e100mm Qwiic Cable\u003c\/a\u003e, and a \u003ca href=\"https:\/\/www.sparkfun.com\/products\/14743\"\u003eUSB A-C cable\u003c\/a\u003e!\u003c\/p\u003e \u003cp\u003eThe SparkFun RP2040 mikroBUSâ�¢ Development Board is a low-cost, high performance platform with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the Thing Plus or \u003cem\u003eFeather\u003c\/em\u003e PTH pin layout, the board also includes a microSD card slot, 16MB (128Mbit) flash memory, a JST single cell battery connector (with a charging circuit and fuel gauge sensor), an addressable WS2812 RGB LED, JTAG PTH pins, four (4-40 screw) mounting holes, our signature Qwiic connectors, and a mikroBUSâ�¢ socket.\u003c\/p\u003e \u003cp\u003eThe RP2040 is supported with both C\/C++ and MicroPython cross-platform development environments, including easy access to runtime debugging. It has UF2 boot and floating-point routines baked into the chip. While the chip has a large amount of internal RAM, the board includes an additional 16MB of external QSPI flash memory to store program code. The RP2040 contains two ARM Cortex-M0+ processors (up to 133MHz) and features:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e264kB of embedded SRAM in six banks\u003c\/li\u003e \u003cli\u003e6 dedicated IO for SPI Flash (supporting XIP)\u003c\/li\u003e \u003cli\u003e30 multifunction GPIO: \u003cul\u003e \u003cli\u003eDedicated hardware for commonly used peripherals\u003c\/li\u003e \u003cli\u003eProgrammable IO for extended peripheral support\u003c\/li\u003e \u003cli\u003eFour 12-bit ADC channels with internal temperature sensor (up to 0.5 MSa\/s)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eUSB 1.1 Host\/Device functionality\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor the mikroBUSâ�¢ socket we include the MIKROE Weather Click. MIKROE Weather Click carries BME280 integrated environmental unit from Bosch. Itâ��s a sensor that detects humidity, pressure, and temperature, specifically designed for low current consumption and long-term stability. The click is designed to work on a 3.3V power supply. It communicates with the target microcontroller over SPI or I2C interface.\u003c\/p\u003e \u003cp\u003eFor the Qwiic port we include the SparkFun Micro OLED Breakout (Qwiic). The SparkFun Qwiic Micro OLED Breakout is a Qwiic-enabled version of our popular Micro OLED display! The small monochrome, blue-on-black OLED screen presents incredibly clear images for your viewing pleasure. Itâ��s â��micro,â�� but it still packs a punch --- the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next project and displaying diagnostic information without resorting to a serial output, all with the ease of use of our own Qwiic Connect System!\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003cem\u003eThe \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun Qwiic Connect System\u003c\/a\u003e is an ecosystem of I\u003csup\u003e2\u003c\/sup\u003eC sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you canâ��t hook it up wrong.\u003c\/em\u003e\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/2004\" class=\"btn btn-default\"\u003eGet Started With the RP2040 mikroBUS Development Board Guide\u003c\/a\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/18721\"\u003eSparkFun RP2040 mirkoBUSâ�¢ Development Board\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/18823\"\u003eMIKROE Weather Click\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/14532\"\u003eSparkFun Micro OLED Breakout (Qwiic)\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/17259\"\u003eFlexible Qwiic Cable - 100mm\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/14743\"\u003eUSB 3.1 Cable A to C - 3 Foot\u003c\/a\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSparkFun RP2040 mikroBUS Dev. Board Features\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRaspberry Pi Foundation's RP2040 microcontroller \u003cul\u003e \u003cli\u003e18\u003csup\u003e\u003ca href=\"#fn1\" id=\"ref1\"\u003e[1]\u003c\/a\u003e\u003c\/sup\u003e Multifunctional GPIO Pins\u003csup\u003e\u003ca href=\"#fn2\" id=\"ref2\"\u003e[2]\u003c\/a\u003e\u003c\/sup\u003e \u003cul\u003e \u003cli\u003eFour available 12-bit ADC channels with internal temperature sensor (500kSa\/s)\u003c\/li\u003e \u003cli\u003eUp to eight 2-channel PWM\u003c\/li\u003e \u003cli\u003eUp to two UARTs\u003c\/li\u003e \u003cli\u003eUp to two I\u003csup\u003e2\u003c\/sup\u003eC buses\u003c\/li\u003e \u003cli\u003eUp to two SPI buses\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eThing Plus (or Feather) Pin Layout: \u003cul\u003e \u003cli\u003e28 PTH Pins\u003c\/li\u003e \u003cli\u003eUSB-C Connector: \u003cul\u003e \u003cli\u003eUSB 1.1 Host\/Device functionality\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e2-pin JST Connector for a LiPo Battery \u003cem\u003e(not included)\u003c\/em\u003e: \u003cul\u003e \u003cli\u003e500mA charging circuit\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e4-pin JST Qwiic Connector\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eLEDs: \u003cul\u003e \u003cli\u003e\n\u003ccode\u003ePWR\u003c\/code\u003e - Red 3.3V power indicator\u003c\/li\u003e \u003cli\u003e\n\u003ccode\u003eCHG\u003c\/code\u003e - Yellow battery charging indicator\u003c\/li\u003e \u003cli\u003e\n\u003ccode\u003e25\u003c\/code\u003e - Blue status\/test LED (\u003ccode\u003eGPIO 25\u003c\/code\u003e)\u003c\/li\u003e \u003cli\u003e\n\u003ccode\u003eWS2812\u003c\/code\u003e - Addressable RGB LED (\u003ccode\u003eGPIO 08\u003c\/code\u003e)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eButtons: \u003cul\u003e \u003cli\u003e\u003ccode\u003eBoot\u003c\/code\u003e\u003c\/li\u003e \u003cli\u003e\u003ccode\u003eReset\u003c\/code\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eJTAG PTH Pins\u003c\/li\u003e \u003cli\u003e16MB QSPI Flash Memory\u003c\/li\u003e \u003cli\u003eµSD Card Slot\u003c\/li\u003e \u003cli\u003emikroBUS Socket\u003c\/li\u003e \u003cli\u003eDimensions: 3.7\" x 1.2\"\u003c\/li\u003e \u003cli\u003eFour Mounting Holes: \u003cul\u003e \u003cli\u003e4-40 screw compatible\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRP2040 General Features\u003c\/strong\u003e:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDual Cortex M0+ processors, up to 133 MHz\u003c\/li\u003e \u003cli\u003e264 kB of embedded SRAM in 6 banks\u003c\/li\u003e \u003cli\u003e6 dedicated IO for QSPI flash, supporting execute in place (XIP)\u003c\/li\u003e \u003cli\u003e30 programmable IO for extended peripheral support\u003c\/li\u003e \u003cli\u003eSWD interface\u003c\/li\u003e \u003cli\u003eTimer with 4 alarms\u003c\/li\u003e \u003cli\u003eReal time counter (RTC)\u003c\/li\u003e \u003cli\u003eUSB 1.1 Host\/Device functionality\u003c\/li\u003e \u003cli\u003eSupported programming languages \u003cul\u003e \u003cli\u003eMicroPython\u003c\/li\u003e \u003cli\u003eC\/C++\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cspan id=\"fn1\" style=\"font-size:80%;\"\u003e1. \u003cb\u003eNote:\u003c\/b\u003e \u003ccode\u003eGPIO 08\u003c\/code\u003e is not included in this count, as it passes through the WS2812 addressable RGB LED first. \u003ccode\u003eGPIO 07\u003c\/code\u003e and \u003ccode\u003eGPIO 23\u003c\/code\u003e are counted as a single GPIO because they are tied together.\u003ca href=\"#ref1\" title=\"Jump back to footnote 1\"\u003eâ�©\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan id=\"fn2\" style=\"font-size:80%;\"\u003e2. \u003cb\u003eNote:\u003c\/b\u003e The GPIO pins are programmable so you can reconfigure the pins! Check out the \u003ca href=\"https:\/\/datasheets.raspberrypi.org\/rp2040\/rp2040_datasheet.pdf\"\u003eRP2040 datasheet\u003c\/a\u003e for more information on the GPIO functionality.\u003ca href=\"#ref2\" title=\"Jump back to footnote 2\"\u003eâ�©\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRP2040 Dev Board\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/b\/8\/a\/9\/b\/RP2040_MikroBUS_schematic.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/2\/0\/3\/0\/4\/RP2040_MikroBUS_eagle_files.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/b\/9\/d\/3\/0\/RP2040_MikroBUS_dimensions.pdf\"\u003eBoard Dimensions\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/2004\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eQwiic Info Page\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/RP2040_mikroBUS_Dev_Board\"\u003eGitHub Hardware Repository\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003eSoftware (SDK) Documentation: \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/raspberrypi.github.io\/pico-sdk-doxygen\/\"\u003eOnline SDK Documentation\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/datasheets.raspberrypi.org\/pico\/raspberry-pi-pico-c-sdk.pdf\"\u003eRaspberry Pi Pico C\/C++ SDK\u003c\/a\u003e - A guide on the libraries and tools for C++ development on RP2040 microcontrollers\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/datasheets.raspberrypi.org\/pico\/raspberry-pi-pico-python-sdk.pdf\"\u003eRaspberry Pi Pico Python SDK\u003c\/a\u003e - A guide on the MicroPython environment for RP2040 microcontrollers\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eHardware Component Information: \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/datasheets.raspberrypi.org\/rp2040\/rp2040_datasheet.pdf\"\u003eRaspberry Pi RP2040 Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/b\/2\/a\/6\/W25Q128JV_Datasheet.pdf\"\u003e16MB Flash (W25Q128) Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/7\/c\/5\/f\/AP2112_Datasheet.pdf\"\u003eLow Dropout (LOD) Voltage Regulator (AP2112) Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/b\/0\/3\/1\/MCP73831_Datasheet.pdf\"\u003eLinear Charge Management Controller (MCP73831) Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/4\/c\/8\/a\/9\/WS2812C-2020_Datasheet.pdf\"\u003eRGB LED (WS2812C) Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/3\/e\/b\/0\/b\/MAX17048-MAX17049_Datasheet.pdf\"\u003eFuel Gauge (MAX17048) Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun Qwiic Connect System\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/download.mikroe.com\/documents\/standards\/mikrobus\/mikrobus-standard-specification-v200.pdf\"\u003emikroBUS Standard\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eSoftware Development Platforms for the RP2040: \u003cul\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/micropython\/micropython\"\u003eMicroPython\u003c\/a\u003e \u003cul\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/raspberrypi\/pico-micropython-examples\"\u003eExample code\u003c\/a\u003e to accompany the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/17835\"\u003eGet Started with MicroPython on Raspberry Pi Pico\u003c\/a\u003e book\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/raspberrypi\/pico-sdk\"\u003ePico C\/C++ SDK\u003c\/a\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/raspberrypi\/pico-examples\"\u003eExample codes\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/raspberrypi\/pico-extras\"\u003eBeta Libraries\u003c\/a\u003e \u003cul\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/raspberrypi\/pico-playground\"\u003eExample code\u003c\/a\u003e for the beta libraries\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eTools and Resources: \u003cul\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/raspberrypi\/pico-bootrom\"\u003eRP2040 Boot ROM\u003c\/a\u003e - Source code for the USB mass storage device emulation\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/raspberrypi\/picotool\"\u003ePicotool\u003c\/a\u003e - Inspecting RP2040 binaries in BOOTSEL mode\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/raspberrypi\/picoprobe\"\u003eDebugging Probe Configuration\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/raspberrypi\/openocd\"\u003eOpenOCD Debugger\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/raspberrypi\/pico-project-generator\"\u003epico-project-generator\u003c\/a\u003e - GUI tool to automatically generate a Pico C\/C++ SDK project\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eUF2 Files\u003c\/strong\u003e- Just drag-and-drop onto your RP2040 board \u003cul\u003e \u003cli\u003eC\/C++ Files: \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/documentation\/pico\/getting-started\/static\/85aac7081a166b7a3d0739970c3927c9\/blink.uf2\"\u003eBlink binary\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/documentation\/pico\/getting-started\/static\/d211f824b207c328c7cae7b0ff733187\/hello_world.uf2\"\u003eHello World binary\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eMicroPython Files: \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/documentation\/rp2040\/getting-started\/static\/f70cc2e37832cde5a107f6f2af06b4bc\/rp2-pico-20210205-unstable-v1.14-8-g1f800cac3.uf2\"\u003eMicroPython firmware (build date: 05-Feb-2021)\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eUtility Files: microcontroller \u003cul\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/datasheets.raspberrypi.com\/soft\/picoprobe.uf2\"\u003eDebugging w\/ picoprobe\u003c\/a\u003e - Debugging with another RP2040 microcontroller\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/datasheets.raspberrypi.com\/soft\/flash_nuke.uf2\"\u003eReset flash memory\u003c\/a\u003e - Clears flash memory from board\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eMIKROE Weather Click\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/1\/c\/2\/f\/Schematic-18823-Weather_Click.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/3\/0\/f\/7\/BME280_Datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e (BME280)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/MikroElektronika\/mikrosdk_click_v2\/tree\/master\/clicks\/weather\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eMicro OLED\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/0\/e\/4\/1\/Qwiic_OLED_Breakout.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/c\/b\/c\/f\/d\/Qwiic_OLED_Breakout_1.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eQwiic Info Page\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/qwiic-micro-oled-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/3\/0\/8\/SSD1306.pdf\"\u003eDatasheet\u003c\/a\u003e (SSD1306)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_Micro_OLED_Py\"\u003eQwiic Micro OLED Python Package Repo\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_Micro_OLED\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/k-ggiWWXIf4\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/zzlh1oGii1Q\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/YGwm-TESdHA\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/x0RDEHqFIF8\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":40331961073749,"sku":"19936:KIT-19936:spark","price":7875.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/19936-SparkFun_RP2040_mikroBUS_Starter_Kit-01.jpg?v=1663616496","url":"https:\/\/www.tanotis.com\/products\/sparkfun-rp2040-mikrobus-starter-kit","provider":"Tanotis","version":"1.0","type":"link"}