{"product_id":"sparkfun-openlog-artemis-kit","title":"SparkFun OpenLog Artemis Kit","description":"\u003cp\u003eThe SparkFun OpenLog Artemis Kit is intended to provide everything you need to log the data of your choice with the OpenLog Artemis and the Qwiic Ecosystem. Inside the kit you will find a reversible USB-A to C cable for power, a 1250mAh LiPo battery for remote applications, a 1GB microSD card, and all the necessary Qwiic cables to connect the included boards. The SparkFun Qwiic Mux Breakout \u0026amp; SparkFun Qwiic Scale are included to enable access to data from any \u0026amp; all Qwiic sensors you may be using in each unique project application.\u003c\/p\u003e \u003cp\u003eThe SparkFun OpenLog Artemis, or \"OLA,\" is an open source data logger that comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. OLA automatically detects, configures, and logs Qwiic sensors plugged into the board (No soldering! No programming!). The OpenLog Artemis is highly configurable over an easy to use serial interface. Simply plug in a USB-C cable and open a terminal at 115200bps. The logging output is automatically streamed to both the terminal and the microSD. Pressing any key will open the configuration menu. The OLA is specifically designed for users who just need to capture a lot of data to a CSV and get back to their larger project.\u003c\/p\u003e \u003cp\u003eThe Qwiic Mux Breakout enables communication with multiple I\u003csup\u003e2\u003c\/sup\u003eC devices that have the same address that makes it simple to interface with. The Qwiic Mux also has eight configurable addresses of its own, allowing for up to 64 I\u003csup\u003e2\u003c\/sup\u003eC buses on a connection. To make it even easier to use this multiplexer, all communication is enacted exclusively via I\u003csup\u003e2\u003c\/sup\u003eC, utilizing our handy Qwiic system.\u003c\/p\u003e \u003cp\u003eThe SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an object. By connecting the board to your microcontroller you will be able to read the changes in the resistance of a load cell and, with some calibration, you'll be able to get very accurate weight measurements. By connecting a load cell to the Qwiic Scale you will be able to translate sensor data into something your microcontroller can read.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit does not include a load cell. \u003ca href=\"https:\/\/www.sparkfun.com\/search\/results?term=load+cell\"\u003eClick here\u003c\/a\u003e to see what load cells we currently have on offer.\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003cem\u003eThe SparkFun Qwiic connect system is an ecosystem of I\u003csup\u003e2\u003c\/sup\u003eC sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can�t hook it up wrong.\u003c\/em\u003e\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/1213\" class=\"btn btn-default\"\u003eGet Started with the SparkFun OpenLog Artemis Hookup Guide\u003c\/a\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/16832\"\u003eSparkFun OpenLog Artemis\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/15242\"\u003eSparkFun Qwiic Scale - NAU7802\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/16784\"\u003eSparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/18286\"\u003eLithium Ion Battery - 1250mAh (IEC62133 Certified)\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/15107\"\u003emicroSD Card - 1GB (Class 4)\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/15425\"\u003eReversible USB A to C Cable - 0.8m\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/17260\"\u003eFlexible Qwiic Cable - 50mm\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/17259\"\u003eFlexible Qwiic Cable - 100mm\u003c\/a\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eOpenLog Artemis:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/4\/e\/1\/7\/OpenLog_Artemis_9DoF_IMU_Schematic_v1_0_latest.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/f\/d\/5\/b\/9\/SparkFun_Artemis_OpenLog_9DoF_IMU_v1_0_latest.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/openlog-artemis-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/2\/1\/a\/4\/SparkFun_OpenLog_Artemis-9DoF_Board_Dimensions.png\"\u003eBoard Dimensions\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/e\/8\/b\/4\/Apollo3_Blue_MCU_Data_Sheet_v0_12_1_rZ9Akgo.pdf\"\u003eDatasheet\u003c\/a\u003e (Apollo3)\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/7\/f\/e\/c\/d\/DS-000189-ICM-20948-v1.3.pdf\"\u003eDatasheet\u003c\/a\u003e (ICM-20948)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/7\/5\/3\/f\/Artemis_Integration_Guide.pdf\"\u003eArtemis Integration Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/designing-with-the-sparkfun-artemis\"\u003eDesigning with the SparkFun Artemis\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/artemis-development-with-arduino\"\u003eArtemis Development with Arduino\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Arduino_Apollo3\"\u003eArduino Core\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/forum.sparkfun.com\/viewforum.php?f=167\"\u003eArtemis Forums\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/artemis\"\u003eArtemis Info Page\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eQwiic Info Page\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/how-to-install-ch340-drivers\"\u003eCH340E USB Drivers\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/Artemis-Firmware-Upload-GUI\"\u003eArtemis Firmware Uploader GUI\u003c\/a\u003e \u003cul\u003e \u003cli\u003eLatest OLA firmware: \u003ca href=\"https:\/\/github.com\/sparkfun\/OpenLog_Artemis\/blob\/master\/Binaries\/OpenLog_Artemis-V10-v19.bin\"\u003ev1.9\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/OpenLog_Artemis_Geophone_Logger\"\u003eGeophone Logger firmware\u003c\/a\u003e for logging seismic activity\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/OpenLog_Artemis_GNSS_Logger\"\u003eGNSS Logger\u003c\/a\u003e for advanced data logging with the uBlox F9 and M9 GNSS modules including support for RAWX and RELPOSNED\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/OpenLog_Artemis\/tree\/master\"\u003eGitHub Hardware Repo\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eQwiic Scale:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/a\/5\/9\/d\/Qwiic_Scale.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/4\/d\/f\/c\/QwiicScale.zip\"\u003eEagleFiles\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/qwiic-scale-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/e\/c\/8\/7\/6\/NAU7802_Data_Sheet_V1.7.pdf\"\u003eDatasheet\u003c\/a\u003e (NAU7802)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-load-cells\"\u003eGetting Started with Load Cells\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Qwiic_Scale_NAU7802_Arduino_Library\"\u003eSparkFun Qwiic Scale NAU7802 Arduino Library\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_Scale\"\u003eHardware Repo\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eQwiic Mux:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/7\/2\/f\/c\/6\/Qwiic_Mux_Schematic.pdf\"\u003eSchematic (v1.1)\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/6\/5\/b\/c\/Qwiic_Mux_Eagle_Files.zip\"\u003eEagle Files (v1.1)\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/qwiic-mux-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/4\/1\/3\/9\/Qwiic_Mux_Dimensions.pdf\"\u003eBoard Dimensions (v1.1)\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/f\/0\/4\/b\/3\/tca9548a.pdf\"\u003eTCA9548A Datasheet\u003c\/a\u003e (TCA9548A)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_I2C_Mux_Arduino_Library\"\u003eSparkFun I2C Mux Arduino Library\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_TCA9548A_Py\"\u003eSparkFun TCA9548A Python Package\u003c\/a\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/qwiic-tca9548a-py.readthedocs.io\/en\/latest\/?\"\u003eReadtheDocs Documentation\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eQwiic Resource Page\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_Mux_TCA9548A\/tree\/v1.1\"\u003eGitHub Hardware Repository (v1.1)\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003eAll product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":39501728251989,"sku":"18295:KIT-18295:spark","price":15125.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/18295-SparkFun_OpenLog_Artemis_Kit-01.jpg?v=1629000988","url":"https:\/\/www.tanotis.com\/products\/sparkfun-openlog-artemis-kit","provider":"Tanotis","version":"1.0","type":"link"}