{"product_id":"sparkfun-myoware-2-0-muscle-sensor-basic-kit","title":"SparkFun MyoWare 2.0 Muscle Sensor Basic Kit","description":"\u003cp\u003eThe MyoWare® 2.0 Muscle Sensor Basic Kit, an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with the bare minimum from the MyoWare 2.0 ecosystem to get started measuring and visualizing muscle activity. Simply snap on the MyoWare 2.0 LED Shield, add some EMG sensor pads, attach the sensor to a muscle group, and flex! The kit also includes a mini screwdriver to easily remove shields, USB A to C cable to recharge the 40mAh LiPo battery, and MyoWare 2.0 Reference Cable to connect to large muscle groups.\u003c\/p\u003e \u003cp\u003eThe MyoWare 2.0 Muscle Sensor included in this kit has been redesigned from the ground up with a new easy-to-use, compact design and upgraded with the latest and greatest chipset improving sensor performance and reliability. The sensor measures muscle activity through the electric potential of the muscle, commonly referred to as surface electromyography (EMG or sEMG for short). When your brain tells your muscle to flex, it sends an electrical signal to your muscle to start recruiting motor units (the bundles of muscle fibers that generate the force behind your muscles).\u003c\/p\u003e \u003cp\u003eThe harder you flex, the more motor units are recruited to generate greater muscle force. The greater the number of motor units, the more the electrical activity of your muscle increases. MyoWare 2.0 Muscle Sensor will analyze the filtered and rectified electrical activity of a muscle and output a signal (0-VIN volts, where VIN signifies the voltage of the power source) that represents how hard the muscle is being flexed. The innovative snap connector system eliminates the need to solder connections with the MyoWare 2.0 LED Shield. The blue 10-segment bar graph provides a visual representation of the measured signal. The more muscle activation measured, the higher up the board LEDs will go!\u003c\/p\u003e \u003cp\u003eThis kit is constructed to follow the standalone example featured in the \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-the-myoware-20-muscle-sensor-ecosystem\"\u003eMyoWare 2.0 Muscle Sensor Guide\u003c\/a\u003e without the need for a microcontroller. Use it to gauge how hard youâ��re working a muscle during a workout, as a teaching tool, or add some myoelectric flair to your Halloween costume!\u003c\/p\u003e \u003cp\u003eNot sure which set of boards to use from the MyoWare 2.0 ecosystem for your application? Check out the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/18441\"\u003eMyoWare 2.0 Muscle Sensor Development Kit\u003c\/a\u003e. The development kit includes all the boards from the MyoWare 2.0 ecosystem and accessories to test out different configurations for your application.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This item may take longer to process due to the battery installed in the equipment and therefore does not qualify for \u003ca href=\"https:\/\/www.sparkfun.com\/support#Same-DayShipping\"\u003esame-day shipping policy\u003c\/a\u003e. Additionally, these batteries can not be shipped via Ground or Economy methods to Alaska or Hawaii. Sorry for any inconvenience this may cause.\u003c\/p\u003e \u003cp\u003eThe MyoWare 2.0 Muscle Sensor and LED Shield are not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals.\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003cem\u003eThe \u003ca href=\"https:\/\/www.sparkfun.com\/myoware\"\u003eMyoWare 2.0 ecosystem\u003c\/a\u003e consists of shields that easily interface with the MyoWare® 2.0 Muscle Sensor, which is a low-cost, Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer Technologies. The innovative connector system allows users to easily snap shields together with a compact low profile and connect to a microcontroller's analog input to measure raw, filtered, and rectified electrical activity of a target muscle. This eliminates the need to solder connections between boards.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cem\u003eThis product is a collaboration with Brian Kaminski from Advancer Technologies. A portion of each sales goes back to them for product support and continued development.\u003c\/em\u003e\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/1956\" class=\"btn btn-default\"\u003eGet Started with the MyoWare 2.0 Muscle Sensor Guide\u003c\/a\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/21265\"\u003eMyoWare 2.0 Muscle Sensor\u003c\/a\u003e (Version 2.0.4)\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/18387\"\u003eMyoWare 2.0 LED Shield\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/15424\"\u003eReversible USB A to C Cable - 2m\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/12969\"\u003eDisposable Surface EMG\/ECG\/EKG Electrode - 24mm (10 pack)\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/19244\"\u003eMyoWare 2.0 Reference Cable\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/9146\"\u003eSparkFun Mini Screwdriver\u003c\/a\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit does NOT include a microcontroller. This is a basic kit to get started with the muscle sensor. Users will need to solder the connection between the muscle sensor and their microcontroller\/single board computer using wires or headers. If connecting directly to a single board computer, you will need an ADC and USB isolator.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMyoWare 2.0 Muscle Sensor Features:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWearable Design\u003c\/li\u003e \u003cli\u003eSupply Voltage \u003cul\u003e \u003cli\u003eMinimum: +2.27V\u003c\/li\u003e \u003cli\u003eTypically: +3.3V to +5V\u003c\/li\u003e \u003cli\u003eMaximum: +5.47V\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eInput Bias Current \u003cul\u003e \u003cli\u003e250pA, max 1nA\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eReverse Polarity Protection\u003c\/li\u003e \u003cli\u003eThree Output Modes \u003cul\u003e \u003cli\u003eRaw EMG\u003c\/li\u003e \u003cli\u003eRectified\u003c\/li\u003e \u003cli\u003eEnvelope\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eExpandable via Shields\u003c\/li\u003e \u003cli\u003eMyoWare® 2.0 Muscle Sensor Form Factor \u003cul\u003e \u003cli\u003e3x Female Snap Pins (Power and EMG Envelope Output)\u003c\/li\u003e \u003cli\u003e3x Male Snap Pins (Input Electrodes)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eLED Indicators \u003cul\u003e \u003cli\u003eVIN\u003c\/li\u003e \u003cli\u003eENV\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eReference Electrode Jumper\u003c\/li\u003e \u003cli\u003eSpecially Designed For Microcontrollers\u003c\/li\u003e \u003cli\u003eAdjustable Gain\u003c\/li\u003e \u003cli\u003eBoard Dimensions \u003cul\u003e \u003cli\u003e37.57mm x 35.90mm (1.48â�� x 1.41â��)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv class=\"well\"\u003e \u003cb\u003eRevision Changes:\u003c\/b\u003e The following changes for V2.0.4 include: \u003cbr\u003e\u003cbr\u003e \u003cul\u003e \u003cli\u003e PCB board thickness increased.\u003c\/li\u003e \u003cli\u003e NPTH for snap connector buttons.\u003c\/li\u003e \u003cli\u003e Updated footprint for snap connectors buttons with slots for improved cleaning.\u003c\/li\u003e \u003cli\u003e Updated size of reference pin's jumper pad.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBoard Dimensions \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/9\/5\/6\/MyoWare_v2_Muscle_Sensor_Board_Dimensions.png\"\u003eMyoWare 2.0 Muscle Sensor\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/9\/5\/6\/MyoWare_v2_LED_Shield_Board_Dimensions.png\"\u003eMyoWare 2.0 LED Shield\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/1956\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"http:\/\/myoware.com\/\"\u003eAdvancer Technologies\u003c\/a\u003e: MyoWare® 2.0 \u003cul\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/9\/5\/6\/MyoWare_v2_QuickStartGuide.pdf\"\u003eQuickstart Guide\u003c\/a\u003e (4.37MB)\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/1\/9\/5\/6\/MyoWare_v2_AdvancedGuide-Updated.pdf\"\u003eAdvanced Guide\u003c\/a\u003e (9.00MB)\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"http:\/\/myoware.com\/patents\"\u003ePatents\u003c\/a\u003e\u003csup\u003e [1]\u003c\/sup\u003e\n\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/6\/9\/5\/MCP738312.pdf\"\u003eMCP73831 Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003ePolymer Lithium Ion Battery (40mAh) \u003cul\u003e \u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Prototyping\/SPE-00-301120-40mah-en-1.0ver.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Prototyping\/DTP301120%20MSDS.PDF\"\u003eMSDS\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.arduino.cc\/reference\/en\/libraries\/arduinoble\/\"\u003eArduino Reference Language: ArduinoBLE Library\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_MyoWare_BLE_Arduino_Examples\"\u003eGitHub Example Repo\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/myoware\"\u003eMyoWare 2.0 Ecosystem Page\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003cp\u003e\u003csup\u003e[1] Note: This product is patent protected. To prevent counterfeit boards, the Eagle design files and GitHub hardware repository are not shared for boards in the MyoWare 2.0 ecosystem.\u003c\/sup\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/d1oUHqPa35I\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/hGwWWsrqwE4\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":40531172753493,"sku":"21267:KIT-21267:spark","price":11550.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/21267-_KIT_MyoWare_2.0_Muscle_Sensor_Basic_Kit-_01.jpg?v=1678246553","url":"https:\/\/www.tanotis.com\/products\/sparkfun-myoware-2-0-muscle-sensor-basic-kit","provider":"Tanotis","version":"1.0","type":"link"}