{"product_id":"sparkfun-mikroe-buck-11-click","title":"SparkFun MIKROE Buck 11 Click","description":"\u003cp\u003eBuck 11 Click is a high-efficiency step-down converter which provides 3.3V on its output, derived from the connected power supply voltage, in the range from 4.2V to 60V. Buck 11 Click is based on the LMR36015, a highly efficient DC-DC step-down converter. In addition, Buck 11 Click offers monitoring the stability of the output voltage by employing an additional A\/D converter circuit. Due to its high efficiency, LMR36015 allows the Click board� to easily deliver up to 1.5A of current. The efficiency for lighter loads is optimized by using the PFM mode. It features a HotRod� package which enables a low noise performance, high efficiency, and very compact size.\u003c\/p\u003e \u003cp\u003eBuck 11 Click is supported by a mikroSDK compliant library, which includes functions that simplify software development.\u003c\/p\u003e \u003cp\u003eThe LMR36015 has a wide voltage input range, which is one of its key features. It can sustain transients up to 66V at its input, making it compliant with the surge immunity requirements of IEC 61000-4-5. It also features a set of standard protection options, found on many similar devices: undervoltage lockout, short circuit protection, thermal shutdown, etc. The Click board� can be used for a wide range of applications that require 3.3V, including field embedded applications, sensors, PLC modules, video surveillance systems, and similar applications that require step-down conversion to 3.3V.\u003c\/p\u003e \u003cp\u003eBuck 11 Click is equipped with the LMR36015, a synchronous step-down converter, from Texas Instruments. This is an advanced integrated step-down converter, which requires a minimum number of external components, readily available on the market. It utilizes a peak-current-mode control architecture, which along with the automatic PFM\/PWM mode switching, ensures a very good efficiency. The LMR36015 buck converter features over-current, under-voltage, and thermal protection, making Buck 11 Click a robust and reliable power supply solution.\u003c\/p\u003e \u003cp\u003eThe output voltage is determined by the feedback voltage on the FB pin. The output voltage is set to 3.3V making it usable with most embedded applications, allowing them to be powered from the same source, like the rest of the application, which may use a higher voltage for its operation. This is a common-case scenario in various field applications where a relatively high voltage is required i.e. for servos, step motors, displays, etc.\u003c\/p\u003e \u003cp\u003eWhen there is overload at the output, the low-side MOSFET will allow the inductor current to drop. It will remain open until the current through the inductor falls below the limit. If the FB voltage drops too much during the overload, the device enters the hiccup mode, in which the device attempts to periodically restarts itself.\u003c\/p\u003e \u003cp\u003eThe LMR36015 is able to automatically switch between PWM and PFM modes, depending on the current through the load. At very light loads, the device is operated in PFM mode. In this mode, the high-side MOSFET is operated in bursts, after which the LMR36015 waits for the current through the inductor to drop below the limit. This way, the device is in an idle state, while the light load consumes energy stored within the coil. This greatly improves the efficiency when a light load is used.\u003c\/p\u003e \u003cp\u003eWhile operated in PWM mode, the output MOSFETs are driven with the constant PWM frequency of 400kHz, using the pulse width modulation to control the output voltage. This provides very good voltage regulation and a low output voltage ripple.\u003c\/p\u003e \u003cp\u003eFeaturing the HotRod� technology, the LMR36015 occupies a very small area on the PCB. Combined with the low count of external components it requires, the LMR36015 leaves enough space for an additional IC to be used. This Click uses the MCP3221, a 12-bit A\/D converter (ADC) which uses the I2C interface, from Microchip. It allows monitoring the output voltage over the I2C interface. This ADC is powered from the +5V mikroBUS� power rail. The same voltage is used as a reference. The Click board� itself requires an external power supply to be connected at the input terminal, labeled as VIN. The VOUT terminal provides the connected load with the regulated 3.3V voltage.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eInterface: I\u003csup\u003e2\u003c\/sup\u003eC\u003c\/li\u003e \u003cli\u003eCompatibility: mikroBUS�\u003c\/li\u003e \u003cli\u003eDimensions: 42.9 x 25.4mm\u003c\/li\u003e \u003cli\u003eInput Voltage: 5V\u003c\/li\u003e \u003cli\u003eEfficiency (5V at VIN, 0.1A to 1.5A): Min. 83.15%, Max. 92.52%\u003c\/li\u003e \u003cli\u003eEfficiency (30V at VIN, 0.1A to 1.5A): Min. 68.67%, Max. 79.52%\u003c\/li\u003e \u003cli\u003eOutput voltage (VOUT): 3.3V\u003c\/li\u003e \u003cli\u003eOutput current (continuous): Min. 0A, Max. 1.5A\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/d\/0\/6\/9\/Schematic-19823-MIKROE_Buck_11_Click.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/a\/1\/8\/0\/3\/LMR36015.pdf\"\u003eLMR36015 Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/c\/0\/9\/d\/MCP3221.pdf\"\u003eMCP3221 Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.mikroe.com\/mikrosdk\"\u003emikroSDK\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/MikroElektronika\/mikrosdk_click_v2\/tree\/master\/clicks\/buck11\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":40331957534805,"sku":"19823:PRT-19823:spark","price":3545.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/19823_-_MIKROE_Buck_11_Click_2.jpg?v=1663616072","url":"https:\/\/www.tanotis.com\/products\/sparkfun-mikroe-buck-11-click","provider":"Tanotis","version":"1.0","type":"link"}