{"product_id":"sparkfun-mikroe-amr-current-click","title":"SparkFun MIKROE AMR Current Click","description":"\u003cp\u003eThe AMR Current Click is product is �±20A fully integrated bi-directional analog output current sensors that deliver both high accuracy and high bandwidth. This state-of-the-art Anisotropic Magneto Resistive (AMR) sensor technology provides inherently low noise, excellent linearity and repeatability.\u003c\/p\u003e \u003cp\u003eAMR Current Click is supported by a mikroSDK compliant library, which includes functions that simplify software development.\u003c\/p\u003e \u003cp\u003eThe AMR Current Click is a Click boardâ�¢ is based on the MCR1101-20-5 current sensor, which is an AMR based integrated current sensor from ACEINNA. The device has superior range and accuracy (0.6% typical total error at 25�°C) and 2.0% max error over temperature. It also features a Superior Frequency Response - 1.5 MHz (typical 3dB BW) and a Fast output response time (300ns typical) with a Low Primary Resistance (0.9 m�©). The MCR1101-20-5 current sensor is factory-calibrated to achieve low offset error and provide a precise analog voltage output that is linearly proportional to the conduction current (AC or DC) with sensitivity (mV\/A) compatible with A\/D converters and analog control loops in power systems.\u003c\/p\u003e \u003cp\u003eVOC pin is connected directly to VOC (Reset) pin on mikroBUSâ�¢. Voltage on this pin defines the overcurrent detection OCD threshold level. Briefly driving this pin to VCC resets and rearms OCD circuit.\u003c\/p\u003e \u003cp\u003eThe AMR sensor device structure is designed to eliminate sensitivity to stray and common mode magnetic fields. Anisotropic magnetoresistance (AMR) makes use of a common material, Permalloy, to act as a magnetometer. Permalloy is an alloy containing roughly 80% nickel and 20% iron. The alloyâ��s resistance depends on the angle between the magnetization and the direction of current flow. In a magnetic field, magnetization rotates toward the direction of the magnetic field and the rotation angle depends on the external fieldâ��s magnitude. In a current sensor application, two of these resistors are connected in a Wheatstone bridge configuration to permit the measurement of the magnitude of the magnetic field produced by the current. AMR properties are well behaved when the filmâ��s magnetic domains are aligned in the same direction. This configuration ensures high sensitivity, good repeatability, and minimal hysteresis. During fabrication, the film is deposited in a strong magnetic field that sets the preferred orientation, or â��easyâ�� axis, of the magnetization vector in the Permalloy resistors. AMR has better sensitivity than other methods and reasonably good temperature stability. The AMR sensor has sensitivity which is approximately a linear function of temperature.\u003c\/p\u003e \u003cp\u003eThe AMR Current have fast and accurate overcurrent fault detection circuitry. The overcurrent fault threshold (I ) is user-configurable via an external resistor divider (FLT INT) and supports a range of 120% to 200% of the full-scale primary input (IP).\u003c\/p\u003e \u003cp\u003eThe sensor resistors are biased to the VCC supply voltage and produce a differential voltage that is ratiometric to VCC. This configuration is suited to applications where the A-to-D or other circuitry receiving the current sensor output signals are biased by and ratiometric to the same supply voltage as the current sensor. The ratiometric configuration provides increased gain and resolution compared to fixed gain.\u003c\/p\u003e \u003cp\u003eThe Click boardâ�¢ detects current by measuring the magnetic field generated by that current. Therefore itâ��s important to consider the effect of externally generated magnetic fields, whether from another current flowing in the system, a magnet, or electromagnetic component.\u003c\/p\u003e \u003cp\u003eThe AMR Current Click also features the MCP3221 AST, which is a A\/D converter with 12-bit resolution. This device provides one single-ended input with very low power consumption. This means that the AMR Current Click can directly transfer the input from analog do digital because it contains the A\/D converter.\u003c\/p\u003e \u003cp\u003eAlso featured on the AMR Current Click is the R7 resistor, which can be used if the communication is going directly to the mikroBUSâ�¢ device and is not used if you are using the A\/D converter (MCP3221 AST).\u003c\/p\u003e \u003cp\u003eThis Click can be used for various purposes, including server, telecom \u0026amp; industrial PWR supplies, power aggregation, over-current protection, motor balance, remote device monitoring and home automation control \u0026amp; IOT remote sensing, among others.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eInterface: Analog, I\u003csup\u003e2\u003c\/sup\u003eC\u003c\/li\u003e \u003cli\u003eCompatibility: mikroBUSâ�¢\u003c\/li\u003e \u003cli\u003eDimensions: 42.9 x 25.4mm\u003c\/li\u003e \u003cli\u003eInput Voltage: 5V\u003c\/li\u003e \u003cli\u003eSupply Voltage: Min. 4.5V, Typ. 5V, Max. 5.5V\u003c\/li\u003e \u003cli\u003ePrimary Conductor: 1.3mâ�¦\u003c\/li\u003e \u003cli\u003eInput Range: Min. -20A, Max. 20A\u003c\/li\u003e \u003cli\u003eSensitivity: 100 mV\/A\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/3\/4\/f\/e\/d\/Schematic-19597-MIKROE_AMR_Current_Click.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/f\/a\/b\/3\/MCR1101-xx-5_datasheet.pdf\"\u003eMCR1101-20-5 Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.mikroe.com\/mikrosdk\"\u003emikroSDK\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/MikroElektronika\/mikrosdk_click_v2\/tree\/master\/clicks\/amrcurrent\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/zzlh1oGii1Q\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":40054699556949,"sku":"19597:SEN-19597:spark","price":2530.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/19597_-_MIKROE_AMR_Current_Click_2.jpg?v=1651343780","url":"https:\/\/www.tanotis.com\/products\/sparkfun-mikroe-amr-current-click","provider":"Tanotis","version":"1.0","type":"link"}