{"product_id":"sparkfun-micromod-gnss-function-board-neo-m9n","title":"SparkFun MicroMod GNSS Function Board - NEO-M9N","description":"\u003cp\u003eThe SparkFun NEO-M9N GNSS Function Board is a high quality, geospatial board with equally impressive configuration options. The NEO-M9N module that is populated on this board is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~1.5 meter accuracy. This Function Board supports concurrent reception of four GNSS. This maximizes position accuracy in challenging conditions, increasing precision and decreases lock time; and thanks to the on-board rechargeable battery, you'll have backup power enabling the GPS to get a hot lock within seconds!\u003c\/p\u003e \u003cp\u003eUtilizing our handy M.2 MicroMod connector, no soldering is required to connect it to your system. Simply match up the key on your processor and function board's beveled edge connector to their respective key on the M.2 connector, then secure them to the Main Board with screws. Once connected, you'll have the option of choosing either the UART, SPI, or I\u003csup\u003e2\u003c\/sup\u003eC (u-blox calls this Display Data Channel) port to communicate with the NEO-M9N.\u003c\/p\u003e \u003cp\u003eThe NEO-M9N module detects jamming and spoofing events and can report them to the host, so that the system can react to such events. A SAW (Surface Acoustic Wave) filter combined with an LNA (Low Noise Amplifier) in the RF path is integrated into the NEO-M9N module which allows normal operation even under strong RF interferences.\u003c\/p\u003e \u003cp\u003eU-blox based GPS products are configurable using the popular, but dense, Windows program called u-center. Plenty of different functions can be configured on the NEO-M9N: baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS\/D-GPS, etc. All of this can be done within the \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_u-blox_GNSS_Arduino_Library\"\u003eSparkFun Arduino Library\u003c\/a\u003e via the I\u003csup\u003e2\u003c\/sup\u003eC bus!\u003c\/p\u003e \u003cp\u003eThe SparkFun GNSS Function Board - NEO-M9N includes a USB type C connector when configuring the module with u-center. Power is provided through the Function Board's edge pins and regulated down through the 3.3V voltage regulator. Two status LEDs are also included for 3V3 and PPS, which can be disabled by cutting the jumpers on the back of the board. A 1x3 header is populated on the board and includes a 2-pin selectable jumper when selecting the communication protocol between SPI or Serial\/I\u003csup\u003e2\u003c\/sup\u003eC. For advanced users, there are jumpers to disable the write protection for the EEPROM (WP), disconnecting the pull-up resistors (I2C), and placing the module in safe boot mode (SAFEBOOT). A U.FL connector is provided to connect a GNSS antenna of your choice to the module. The board is equipped with an on-board rechargeable battery that provides power to the RTC on the NEO-M9N. This reduces the time-to-first fix from a cold start (~24s) to a hot start (~2s). The battery will maintain RTC and GNSS orbit data without being connected to power for plenty of time.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The SparkFun MicroMod GNSS Function Board - NEO-M9N does \u003cstrong\u003eNOT\u003c\/strong\u003e include a MicroMod Artemis Processor Board, MicroMod Main Board - Single, U.FL adapter, or GNSS antenna. These components will need to be purchased separately.\u003c\/p\u003e \u003cdiv class=\"alert alert-warning\"\u003e\n\u003cb\u003eThis product requires an antenna:\u003c\/b\u003e Be sure to check out the related products\/hookup accessories and pick a suitable antenna for your project.\u003c\/div\u003e \u003chr\u003e \u003cp\u003e\u003cem\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/micromod\"\u003eMicroMod\u003c\/a\u003e is a modular interface ecosystem that connects a microcontroller �processor board� to various �carrier board� peripherals. Utilizing the M.2 standard, the MicroMod standard is designed to easily swap out processors on the fly. Pair a specialized carrier board for the project you need with your choice of compatible processor!\u003c\/em\u003e\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/1999\" class=\"btn btn-default\"\u003eGet Started with the MicroMod GNSS Function Board (NEO-M9N)\u003c\/a\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e92-Channel GNSS Receiver\u003c\/li\u003e \u003cli\u003e1.5m Horizontal Accuracy\u003c\/li\u003e \u003cli\u003e25Hz Max Update Rate (four concurrent GNSS)\u003c\/li\u003e \u003cli\u003eTime-To-First-Fix: \u003cul\u003e \u003cli\u003eCold: 24s\u003c\/li\u003e \u003cli\u003eHot: 2s\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eMax Altitude: 80,000m\u003c\/li\u003e \u003cli\u003eMax G: �4\u003c\/li\u003e \u003cli\u003eMax Velocity: 500m\/s\u003c\/li\u003e \u003cli\u003eVelocity Accuracy: 0.05m\/s\u003c\/li\u003e \u003cli\u003eHeading Accuracy: 0.3 degrees\u003c\/li\u003e \u003cli\u003eTime Pulse Accuracy: 30ns\u003c\/li\u003e \u003cli\u003e3.3V VCC and I\/O \u003cul\u003e \u003cli\u003eCurrent Consumption (tracking, continuous mode) \u003cul\u003e \u003cli\u003e~36mA @ 3.0V GPS+GLONASS+GALILEO+BEIDOU\u003c\/li\u003e \u003cli\u003e~31mA @ 3.0V GPS+GLONASS\u003c\/li\u003e \u003cli\u003e~27mA @ 3.0V GPS\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eSoftware Configurable \u003cul\u003e \u003cli\u003eGeofencing\u003c\/li\u003e \u003cli\u003eOdometer\u003c\/li\u003e \u003cli\u003eSpoofing Detection\u003c\/li\u003e \u003cli\u003eExternal Interrupt\u003c\/li\u003e \u003cli\u003ePin Control\u003c\/li\u003e \u003cli\u003eLow Power Mode\u003c\/li\u003e \u003cli\u003eMany others!\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eSupports NMEA, UBX, and RTCM protocols over SPI, USB, UART, or I2C interfaces\u003c\/li\u003e \u003cli\u003e3.3V\/600mA AP2112K Voltage Regulator\u003c\/li\u003e \u003cli\u003e1.5mAh battery backup for RTC\u003c\/li\u003e \u003cli\u003eIsolation switch for all MicroMod M.2 connections\u003c\/li\u003e \u003cli\u003eLEDs \u003cul\u003e \u003cli\u003e3V3 - 3.3v Power\u003c\/li\u003e \u003cli\u003ePPS - Pulse Per Second Indicator\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eJumpers \u003cul\u003e \u003cli\u003e3v3 LED\u003c\/li\u003e \u003cli\u003ePPS LED\u003c\/li\u003e \u003cli\u003eBUS SELECT \u003cul\u003e \u003cli\u003eSPI or Serial\/I2C\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eI2C\u003c\/li\u003e \u003cli\u003eSAFEBOOT\u003c\/li\u003e \u003cli\u003eWP\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eConnectors and Ports \u003cul\u003e \u003cli\u003e1x M.2 (Solderless access to NEO-M9N via SPI, UART, and I\u003csup\u003e2\u003c\/sup\u003eC)\u003c\/li\u003e \u003cli\u003e1x USB Type C (Configuring NEO-M9N module)\u003c\/li\u003e \u003cli\u003e1x u.Fl (for use with GNSS antenna of your choice)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMicroMod GNSS Function Board Documentation:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/e\/9\/4\/f\/b\/SparkFun_MicroMod_GNSS_Function_Board_NEO-M9N_Schematic.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/3\/6\/0\/0\/SparkFun_GNSS_NEO-M9N_V1_2.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/0\/f\/7\/1\/2\/SparkFun_MicroMod_GNSS_Function_Board_NEO-M9N_Board_Dimensions.png\"\u003eBoard Dimensions\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/1999\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/gps\"\u003eBuilding a GPS System\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/neo-m9n-module#tab-documentation-resources\"\u003eu-blox NEO-M9N Documents \u0026amp; Resources\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_u-blox_GNSS_Arduino_Library\"\u003eSparkFun u-blox GNSS Arduino Library\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_GNSS_Function_Board_NEO-M9\"\u003eGitHub Hardware Repo\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNEO-M9N Documentation\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/b\/f\/b\/a\/7\/NEO-M9N_DataSheet__UBX-19014285_.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/a\/7\/8\/6\/d\/NEO-M9N_ProductSummary__UBX-19027207_.pdf\"\u003eProduct Summary\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/d\/7\/8\/3\/NEO-M9N_Integrationmanual__UBX-19014286_.pdf\"\u003eIntegration Manual\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/learn_tutorials\/8\/6\/9\/u-blox8-M8_ReceiverDescrProtSpec__UBX-13003221__Public.pdf\"\u003eu-blox Protocol Specification\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/b\/5\/5\/8\/Ublox_ECCN.pdf\"\u003eu-blox ECCN\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center Software\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eMicroMod Documentation\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-micromod\"\u003eGetting Started with MicroMod\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/designing-with-micromod\"\u003eDesigning with MicroMod\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/micromod\"\u003eMicroMod Info Page\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/forum.sparkfun.com\/viewforum.php?f=180\"\u003eMicroMod Forums\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/FY0KOrzQ2KE\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/GeeHryO9D8k\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4QUJWeSrzD0\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6m0xGwkYYy0\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":40331952160853,"sku":"18378:GPS-18378:spark","price":7525.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/NEOM9N_01.jpg?v=1663615510","url":"https:\/\/www.tanotis.com\/products\/sparkfun-micromod-gnss-function-board-neo-m9n","provider":"Tanotis","version":"1.0","type":"link"}