{"product_id":"sparkfun-artemis-development-kit-with-camera","title":"SparkFun Artemis Development Kit with Camera","description":"\u003cp\u003eThe SparkFun Artemis Development Kit is the latest board to be released around the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/15484\"\u003eSparkFun Artemis Module\u003c\/a\u003e and it allows access to more software development features than previous Artemis based boards. This Kit includes the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/16828\"\u003eSparkFun Artemis DK board\u003c\/a\u003e as well as the accessories (Himax camera \u0026amp; USB-C cable) needed to get started right away. Recommended software used to program the Artemis DK are the Arduino IDE, Arm® Mbed� OS (Studio and CLI), and AmbiqSDK. An updated USB interface (MKL26Z128VFM4 Arm® Cortex®-M0+ MCU, from NXP) allows the Artemis Dev Kit to act as:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMass Storage Device (MSD): Used to provide drag and drop programming to the Artemis Module.\u003c\/li\u003e \u003cli\u003eHuman Interface Device (HID): Used for the debugging interface to the Artemis Module.\u003c\/li\u003e \u003cli\u003eCommunication Port (COM): Used to provide a serial communication UART between the Artemis and the USB connection (PC).\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe Artemis Module provides a Cortex®-M4F with BLE 5.0 running at 48MHz with an available 96MHz turbo mode and power as low as 6uA per MHz (less than 5mW). The SparkFun Artemis Module is fully FCC\/IC\/CE certified with 1M flash and 384k RAM you'll have plenty of room for your code. The flexibility of the Artemis module starts with our \u003ca href=\"https:\/\/github.com\/sparkfun\/Arduino_Apollo3\"\u003eArduino core\u003c\/a\u003e. You can program and use the Artemis module just like you would an Uno or any other Arduino. Additional functionality stems from the ability of the Artemis Dev kit to run RTOS such as the Arm Mbed OS, or the AmbiqSDK.\u003c\/p\u003e \u003cp\u003eAttached to the \u003cem\u003e\"Qwiic\"\u003c\/em\u003e I\u003csup\u003e2\u003c\/sup\u003eC bus, we've added a LIS2DH12TR MEMS accelerometer (for things like gesture recogntion), a digital MEMS microphone, and an edge camera connector for the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/15570\"\u003eHimax CMOS imaging camera\u003c\/a\u003e to experiment with always-on voice commands, and image recognition with TensorFlow and machine learning. All of the Artemis Development Kit pins are broken out to 0.1\" spaced female headers (i.e. connectors). There are also two rows of breakout pins with 0.1\" pitch spacing for headers; and a 0.08\" pitch spacing to clip on IC-hooks, used by most logic analyzers. Additionally the Silk on the back of the Artemis DK acts as a chart to show pins by functionality (peripherals, ADC, PWM, UART0, \u0026amp; UART1) and act as an aid while developing software. The board is powered \u0026amp; programmed via USB-C, and includes a Qwiic connector to make I\u003csup\u003e2\u003c\/sup\u003eC easy and is fully compatible with SparkFun's Arduino core to be programmed under the Arduino IDE.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-the-artemis-development-kit\" class=\"btn btn-default\"\u003eGet Started With the SparkFun Artemis Development Kit Guide\u003c\/a\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/16828\"\u003eArtemis Development Kit\u003c\/a\u003e (Board)\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/15570\"\u003eHimax HM01B0 Camera\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/15425\"\u003eReversible USB A to C - 0.8m\u003c\/a\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eArtemis Dev Kit\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCompatible with Arduino, Mbed™ OS, and AmbiqSDK Development Programs\u003c\/li\u003e \u003cli\u003ePower: \u003cul\u003e \u003cli\u003e5V Provided Through the USB-C Connector\u003c\/li\u003e \u003cli\u003e1.8V, 3.3V, and 5V Available on Power Header\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eInterface Chip (MKL26Z128VFM4 ARM\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-M0+ MCU): \u003cul\u003e \u003cli\u003eDrag and Drop Programming\u003c\/li\u003e \u003cli\u003eSWD Interface\u003c\/li\u003e \u003cli\u003eJTAG Programming PTH\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eArtemis Module: \u003cul\u003e \u003cli\u003eApollo3 ARM\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-M4F MCU\u003c\/li\u003e \u003cli\u003eBLE 5.0 with FCC Certification\u003c\/li\u003e \u003cli\u003e24 Breakout I\/O Pins \u003cul\u003e \u003cli\u003eEight 14-bit ADC Pins\u003c\/li\u003e \u003cli\u003eEighteen 16-bit PWM Pins\u003c\/li\u003e \u003cli\u003eTwo Independent UART Ports\u003c\/li\u003e \u003cli\u003eThree Peripheral I\u003csup\u003e2\u003c\/sup\u003eC\/SPI Buses\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eJTAG Programming PTH\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eSensors: \u003cul\u003e \u003cli\u003e3-axis Accelerometer (LIS2DH12)\u003c\/li\u003e \u003cli\u003ePDM Microphone (SPH0641LM4H-1)\u003c\/li\u003e \u003cli\u003eCamera Connector (for the Himax HM01B0 Camera)\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eQwiic Connector \u003cul\u003e \u003cli\u003eOn Primary I\u003csup\u003e2\u003c\/sup\u003eC Bus\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eHimax HM01B0 Camera\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003eImage Sensor\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUltra Low Power Image Sensor (ULPIS) designed for Always On vision devices and applications\u003c\/li\u003e \u003cli\u003eHigh sensitivity 3.6µ BrightSense\u003csup\u003eTM\u003c\/sup\u003e pixel technology\u003c\/li\u003e \u003cli\u003e320 x 320 active pixel resolution with support for QVGA window, vertical flip and horizontal mirror readout\u003c\/li\u003e \u003cli\u003eProgrammable black level calibration target, frame size, frame rate, exposure, analog gain (up to 8x) and digital gain (up to 4x)\u003c\/li\u003e \u003cli\u003eAutomatic exposure and gain control loop with support for 50 \/ 60Hz flicker avoidance\u003c\/li\u003e \u003cli\u003eFlexible 1bit, 4bit and 8bit video data interface with video frame and line sync\u003c\/li\u003e \u003cli\u003eMotion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt\u003c\/li\u003e \u003cli\u003eOn-chip self oscillator\u003c\/li\u003e \u003cli\u003eI2C 2-wire serial interface for register access\u003c\/li\u003e \u003cli\u003eHigh CRA for low profile module design\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003eSensor Parameters\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eActive Pixel Array 320 x 320\u003c\/li\u003e \u003cli\u003ePixel Size 3.6 µm x 3.6 µm\u003c\/li\u003e \u003cli\u003eFull Image Area 1152 µm x 1152 µm\u003c\/li\u003e \u003cli\u003eDiagonal (Optical Format) 1.63 mm (1\/11?)\u003c\/li\u003e \u003cli\u003eColor Filter Array Monochrome and Bayer\u003c\/li\u003e \u003cli\u003eScan Mode: Progressive\u003c\/li\u003e \u003cli\u003eShutter Type: Electronic Rolling Shutter\u003c\/li\u003e \u003cli\u003eFrame Rate MAX 51 fps @ 320 x 320, 60 fps @ 320 x 240 (QVGA)\u003c\/li\u003e \u003cli\u003eCRA (maximum) 30º\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003eSensor Specifications\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSupply Voltage: Analog - 2.8 V, Digital - 1.5V (Internal LDO: 1.5V � 2.8V), I\/O - 1.5 � 2.8V\u003c\/li\u003e \u003cli\u003eInput Reference Clock: 3 � 50 MHz\u003c\/li\u003e \u003cli\u003eSerial Interface (I2C): 2-wire, 400 KHz max.\u003c\/li\u003e \u003cli\u003eVideo Data Interface: 1b, 4b, 8b with frame \/ line SYNC\u003c\/li\u003e \u003cli\u003eOutput Clock Rate MAX: 50 MHz for 1bit, 12.5 MHz for 4bit, 6.25 MHz for 8bit\u003c\/li\u003e \u003cli\u003eEst. Power Consumption (include IO with 5pF load): \u003cul\u003e \u003cli\u003eQVGA 60FPS (Typical) \u0026lt;4 mW\u003c\/li\u003e \u003cli\u003eQVGA 30FPS (Typical) \u0026lt;2 mW\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/2\/9\/7\/c\/c\/ArtemisDevKit_schematic.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/6\/7\/a\/3\/ArtemisDevKit_Eagle_Files_v10.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/2\/b\/a\/0\/c\/ArtemisDevKit_dimensions.pdf\"\u003eBoard Dimensions\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/b\/e\/8\/c\/Graphical_Datasheet_Artemis_DK.pdf\"\u003eGraphical Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/1198\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003eSoftware Guides: \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/artemis-development-with-the-arduino-ide\"\u003eArtemis Development with the Arduino IDE\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/artemis-development-on-arm-mbed-os-beta\"\u003eArtemis Development with Arm® Mbed™ OS (Beta)\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003eArtemis Development with Arm® Mbed™ OS (Pending release)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/using-sparkfun-edge-board-with-ambiq-apollo3-sdk\"\u003eArtemis Development with the AmbiqSDK\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eHardware Component Information: \u003cul\u003e \u003cli\u003eArtemis Module: \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/3\/9\/3\/1\/Apollo3_Blue_MCU_Data_Sheet_v0_9_1.pdf\"\u003eApollo3 Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/3\/7\/5\/7\/Apollo3_Pad_Mapping.pdf\"\u003eApollo3 Pad Mapping\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/e\/8\/c\/2\/Artemis_Integration_Guide.pdf\"\u003eArtemis Integration Guide\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eInterface Chip: \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/3\/8\/a\/d\/KL26P64M48SF5_datasheet.pdf\"\u003eMKL26Z128VFM4 Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/b\/c\/f\/c\/2\/KL26P121M48SF4_reference_manual.pdf\"\u003eMKL26P64M48SF5 Reference Manual\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/b\/3\/e\/8\/e\/HM01B0-MNA-Datasheet.pdf\"\u003eHimax Camera (HM01B0) Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/9\/d\/3\/5\/SPH0641LM4H-1_datasheet.pdf\"\u003ePDM Microphone (SPH0641LM4H-1) Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/a\/e\/e\/3\/9\/lis2dh12_datasheet.pdf\"\u003eAccelerometer (LIS2DH12) Datasheet\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun Qwiic Connect System\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/ArtemisDevKit\"\u003eGitHub Hardware Repository\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Apollo3_AmbiqSuite_BSPs\"\u003eGitHub Repository for Apollo3 Board Support Packages (BSP)\u003c\/a\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Apollo3_AmbiqSuite_BSPs\/raw\/master\/artemis_dk\/intfc\/kl26z_bl.bin\"\u003e DAPLink Bootloader: \u003ccode\u003ekl26z_artemis_dk_if.bin\u003c\/code\u003e\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Apollo3_AmbiqSuite_BSPs\/raw\/master\/artemis_dk\/intfc\/kl26z_artemis_dk_if.bin\"\u003eDAPLink Interface Firmware: \u003ccode\u003ekl26z_bl.bin\u003c\/code\u003e\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003eDevelopment Platforms for Artemis Module: \u003cul\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/Arduino_Apollo3\"\u003eSparkFun Ambiq Apollo3 Arduino Core\u003c\/a\u003e \u003cul\u003e \u003cli\u003e\n\u003ccode\u003e.json\u003c\/code\u003e file needed for the SparkFun Ambiq Apollo3 Arduino Core: \u003cbr\u003e \u003ca href=\"https:\/\/raw.githubusercontent.com\/sparkfun\/Arduino_Apollo3\/master\/package_sparkfun_apollo3_index.json\"\u003e\u003ccode\u003ehttps:\/\/raw.githubusercontent.com\/sparkfun\/Arduino_Apollo3\/master\/package_sparkfun_apollo3_index.json\u003c\/code\u003e\u003c\/a\u003e\n\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/mbed-os-ambiq-apollo3\"\u003eMBed™ OS\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/AmbiqSuiteSDK\"\u003eAmbiqSDK\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/pyOCD\"\u003epyOCD\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/LQ_uEkMtPVs\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e\u003cbr\u003eAll product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":39501727236181,"sku":"17071:KIT-17071:spark","price":7215.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/17071-SparkFun_Artemis_Development_Kit_with_Camera-01.jpg?v=1629000747","url":"https:\/\/www.tanotis.com\/products\/sparkfun-artemis-development-kit-with-camera","provider":"Tanotis","version":"1.0","type":"link"}