FAN53526 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface capable of operating up to 3.4MHz. Using a proprietary architecture with synchronous rectification, the FAN53526 is capable of delivering 3A continuous at over 80% efficiency, maintaining that efficiency at load currents as low as 10mA. The regulator operates at a nominal fixed frequency of 2.4MHz, which reduces the value of the external components. Additional output capacitance can be added to improve regulation during load transients without affecting stability. At moderate and light loads, Pulse Frequency Modulation (PFM) is used to operate input power-save mode with a typical quiescent current of 50A at room temperature. Applications includes graphic and DSP processors, hard disk drives, LPDDR3, LPDDR4 tablets, netbooks, ultra-mobile PCs, smart phones and gaming devices.
- Fixed frequency operation: 2.4MHz, best-in-class load transient
- Digitally programmable output voltage:0.600V to 1.39375V in 6.25mV steps
- Programmable slew rate for voltage transitions
- I2C compatible interface up to 3.4Mbps
- PFM mode for high efficiency in light-load
- Quiescent current in PFM mode: 50µA (typical)
- Input undervoltage lockout (UVLO)
- Thermal shutdown and overload protection
Warnings Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Other details
| Brand |
ONSEMI |
| Part Number |
FAN53526UC224X |
| Quantity |
Each (Supplied on Cut Tape) |
| Technical Data Sheet EN |
 |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
