|Price is inclusive of GST and Import duty charges|
|B2B customers can avail ₹ 2664.18 ITC on this product|
|Buy on EMI starting at 847/month|
|100% Secure Payments | 100% Genuine product|
|The product is eligible for Free Shipping|
- Extend HDMI Signals up to 150'
- Supports Up to 1080p @ 60 Hz
- HDMI 1.4 Connectivity
- PCM Audio Support
- Includes 3-Port HDMI Switch
Install your display device up to 150' from your A/V source with the IOGEAR GWHDKIT11SW Wireless HDMI Extender . It allows you to transmit audio and video signals from an HDMI-equipped source device to an HD display or projector up to 150' away, within line of sight. It supports resolutions of up to 1080p at 60 Hz, so you'll get the same picture and sound quality without the wiring. It comes with an IR blaster cable and IR extension cable to allow for remote control pass-through, as well as 2 HDMI cables and a 3-port HDMI switch.
- Wireless HDMI Video up to 150'
- With support for HDCP and Full HD resolutions up to 60 fps, you can place your HD display or projector up to 150' from the video source without sacrificing picture and sound quality. Enjoy the Full HD experience with the convenience of wireless HDMI, minimizing cable clutter, and allowing you to move your display to the patio or den for the big game or party, or hide your A/V equipment across the room. Save the time and expense of hiring installers to run HDMI cables through your ceiling and walls.
- Plug & Play
- The Wireless HDMI TV Connection Kit comes with everything you need inside the box to get started quickly. The kit includes two HDMI cables, so you won't have to worry about shopping for the right cable. Connect one HDMI cable between your source video device and the HDMI transmitter, and the other cable between the HDMI receiver and your display or projector. Plug in power, and you're ready to enjoy your content with no network or security configuration required; the transmitter and receiver are already paired together over an independent wireless network connection with their own WPA security enabled.
- Control Your Source Device with IR (Infrared) Support
- You can control your source A/V device directly from your display or projector � just point your remote at it with the included IR blaster and receiver installed. Change the channel, pause, fast-forward, and control any other function of your cable/satellite box, DVD/Blu-ray player, or any other piece of A/V equipment in your system.
IOGEAR GWHDKIT11SW specs
|Connectors|| Transmitter: 1 x HDMI in |
1 x 1/8" / 3.5 mm IR out
Receiver: 1 x HDMI out
1 x 1/8" / 3.5 mm IR in
|Maximum Video Resolution||1080p @ 60 Hz|
|Supported Audio Codecs||PCM|
|IR Frequency Range||20 to 60 Hz|
|Radio Frequency||5.8 GHz|
|Transmission Range||Up to 150' / 45.7 m|
|Transmission Speed||Up to 10.2 Gbps|
|System Requirements|| Source Device: HDMI output |
Display Device: HDMI input
|Operating Temperature||32 to 122°F / 0 to 50°C|
|Storage Temperature||14 to 158°F / -10 to 70°C|
|Power Requirements||5 VDC, 2 A|
|Power Consumption|| Transmitter: 7 W |
Receiver: 5 W
|Dimensions (W x H x D)||4.72 x 0.91 x 3.15" / 12 x 2.31 x 8 cm each|
|Weight||6.4 oz / 181.4 g each|
|Package Weight||2.2 lb|
|Box Dimensions (LxWxH)||9.8 x 7.0 x 3.2"|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk discount will be automatically applied during checkout based on quantity.