EVAL-1ED3890MX12M is in half-bridge configuration with two gate driver ICs (1ED3890MX12M) to drive power switches such as IGBTs, MOSFETs and SiC MOSFETs. The switch type can be freely chosen. The board has a size of 85 x 85 x 15 mm without any power switch assembled. The board is best suited to leverage the highly configurable X3 Digital (1ED38xx) family with its reach feature-set. Configuration is performed via I2C bus. The evaluation board is recommended to be used with a companion microcontroller evaluation board EVAL-1ED38X0DCT to optimize the configuration process.
- I2C bus for parameter adjustment, state & fault feedback, ADC measurements and condition monitoring
- Adjustable clamp/clamp driver/ADC pin
- Two precise VCEsat detection circuit with fault output, adjustable leading edge blanking time
- Two-level turn-off (TLTO) with adjustable slopes, plateau time and plateau level
- Adjustable soft turn-off after desaturation detection
- Adjustable hardware UVLO with hysteresis for IGBTs and MOSFETs on both VCC2 and VEE2 rails
- ADC measurement of internal parameters: supply voltages and internal temperature
- 40 V absolute maximum output supply voltage
- ± 9A typical sourcing and sinking gate current capability
- High common-mode transient immunity CMTI = 200KV/µs
Other details
| Brand |
INFINEON |
| Part Number |
EVAL1ED3890MX12MTOBO1 |
| Quantity |
Each |
| User Manual EN |
 |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
