- Converts Bulkhead to Fiber-Optic Port
- Third Generation of 4401 Adapter
- Hard Anodized Aluminum Plug Connection
- Use with 2018 Later Ikelite Strobes
- Higher Sensitivity for LED Triggers
- Manual Exposure Only
- For DS50/DS51/DS125/DS160/DS161 Strobes
- Depth Rating: 295'
The third generation of the 4401 Fiber Optic Adapter, Ikelite 's Fiber-Optic Converter does everything that the previous models did, but features a hard anodized aluminum plug connection which reduces weight without sacrificing durability. It is recommended for use with any Ikelite strobe produced September 2018 or later with a hard anodized aluminum bulkhead.
The 4401.3 continues to be sensitive enough to work with internal electrical-to-optical LED flash triggers. These triggers are found in Sea Sea and Nauticam housings, among others. The converter adapts the electrical bulkhead of any Ikelite DS strobe into a fiber-optic port.
Updated electronics make this converter capable of accurately reading the LED signals for fast and reliable triggering. Like the original Fiber Optic Adapter, it is also compatible with any system where the camera's built-in flash can be detected by a fiber-optic cable. The converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes, so there's no setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure.
This device is a non-TTL, manual exposure unit capable of supporting a single strobe. It works with Ikelite's DS50, DS51, DS125, DS160, and DS161 strobes. The converter features a depth rating of 295'.
- Hard anodized aluminum plug connection, compatible with any Ikelite strobe produced September 2018 or later with a hard anodized aluminum bulkhead
- Converts the electrical bulkhead of any Ikelite DS strobe into a fiber-optic port.
- Offers all the capabilities and functionality of the earlier 4401 Fiber Optic Adapter.
- Features heightened sensitivity for use specifically with Sea Sea, Nauticam, and other housings with internal electrical-to-optical LED flash triggers. These devices translate camera's electrical signals into a series of LED flashes, which are much dimmer than traditional built-in camera flash.
- Updated electronics make this converter capable of accurately reading the LED signals for fast and reliable triggering.
- Compatible with any system where the camera's built-in flash can be detected by a fiber-optic cable.
- Automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes, so there's no setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure.
- Non-TTL, manual exposure device capable of supporting a single strobe. The strobe's output may be adjusted using its built-in manual power settings.
- Works with Ikelite's DS50, DS51, DS125, DS160, and DS161 strobes.
- Compatible with the following fiber-optic cables: Ikelite Fiber Optic Coiled Cord # 4501, INON Optical D Cable "Non-wireless type" L-Connector, Sea Sea Fiber Optic Cable (L-type) #50107, Sea Sea Fiber Optic Cable II #50128, Olympus UW Fiber Optic Cable PTCB-E02, Nauticam Optical Fiber Cable # 26211 Nauticam to INON, Nauticam Optical Fiber Cable # 26212 Nauticam to Sea Sea.
UPC: 883711056340
In the Box
Ikelite 4401.3 Fiber Optic Converter for DS Strobes (3rd Generation)
Connector Protector Limited 1-Year Warranty
Ikelite 4401.3 specs
| Packaging Info |
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 3.0 x 3.0 x 2.0" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
