Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt

Click on picture to view larger

Cinetics Three Axis360 Pro Motorized Slider, Pan and Tilt

For Motorized Slides, Pans, and Tilts 3x Digital Stepper Motors Each Motor Supports up to 11 lb 3x Controllers with CineMoco Software Speeds up to 110°/s Incremental Steps Down to...

Regular price Rs. 200,790.00
  • For Motorized Slides, Pans, and Tilts
  • 3x Digital Stepper Motors
  • Each Motor Supports up to 11 lb
  • 3x Controllers with CineMoco Software
  • Speeds up to 110°/s
  • Incremental Steps Down to 0.03°
  • 32" Slider
  • Mini Tripod Kit with Ballhead
  • 2x Quick-Release Clamps / L Brackets
  • Arca-Type Quick-Release Plate

The Three Axis360 Pro Motorized Slider, Pan and Tilt from B&H lets you create dynamic video and timelapse photography sequences with fluid and precise motorized slides, pans, and tilts. The kit includes the Axis360 Pro Motorized Slider--complete with a 32" slider, AxisPro Motor, Controller, and Mini Tripod Kit with Ballhead--and two additional Axis360 Motors and Controllers for 3-axis motorized movements.

The system centers around three powerful Axis360 digital stepper motor, which provides smooth or incremental movements, and works with most DLSR, mirrorless, and digital cinema cameras weighing up to 11 pounds. Each Axis360 Motor provides a 1/4"-20 mounting thread and a motor drive with a 1/4"-20 threaded screw for attaching your camera or a mounting bracket. Use one motor to drive the pulley system on the 32" slider, one to pan the camera, and one to tilt the camera.

Each motor is run by the Controller unit, which uses CineMoco software to control movement and synchronized timelapse photos. The Controller works with most video cameras and can sync moves and timelapse photos on most Canon and Nikon DLSR cameras using included cables. A built-in rechargeable battery provides six hours of continuous operation on a single charge or up to 24 hours in power save mode. In video mode, the Controller unit provides speeds up to 110° per second. For timelapse photography, it enables incremental movements as small as 0.03°. Controllers can be controlled individually or daisy chained together with a standard 3.5mm stereo cable for synchronized control.

The 32" aluminum slider provides a platform for side-to-side and forward/backward movements. The sliding platform rolls on eight urethane coated bearings and has adjustable drag. You can move it by hand or with a belt and pulley system driven by one of the Axis360 motors and Controller. An Arca-type quick-release plate for balancing larger cameras or cameras with long lenses To configure your camera and Axis360 motor for tilt movements, a set of quick-release clamps and L Brackets are included. Mount this configuration to the slider, or to the included mini tripod kit.

Please see the links below for more information on the components of this kit.

  • Cinetics Axis360 Pro Motorized Motion Control System and Slider

    The Axis360 Pro Motorized Motion Control System and Slider from Cinetics lets you create dynamic video and timelapse photography sequences with fluid and precise motorized slides, pans, and tilts. The versatile system is compact, lightweight, and easy to set up. It centers around the powerful Axis360 digital stepper motor, which proves smooth or incremental movements, and works with most DLSR, mirrorless, and digital cinema cameras.

    The Axis360 motor is run by the Controller unit, which uses CineMoco software to control movement and synchronized timelapse photos. The Controller works with most video cameras and can sync moves and timelapse photos on most Canon and Nikon DLSR cameras using optional cables. It can move any camera weighing less than 11 pounds. A built-in rechargeable battery provides six hours of continuous operation on a single charge or up to 24 hours in power save mode. In video mode, the Controller unit provides speeds up to 110° per second. For timelapse photography, it enables incremental movements as small as 0.03°.

    A 32" aluminum slider provides a platform for side-to-side and forward/backward movements. The sliding platform rolls on eight urethane coated bearing and has adjustable drag. You can move it by hand or with a belt and pulley system driven by the Axis360 motor and Controller. For motorized tilts, a mini tripod is included along with two L brackets - one for mounting your camera to the motor/controller and one for mounting the entire setup to the mini tripod.

    Also included with as part of the Axis360 system is a ballhead, an Arca-type quick-release plate for balancing larger cameras or cameras with long lenses, and two quick-release clamps for holding an L-bracket or Arca-type plate. The components of the Axis360 Pro system are stored in included travel bags. Two large bags are provided for the balance kit, tripod, rail cart, and outrigger legs. It also comes with a longer rail bag for the rails and rail brace, and one smaller bag for the controller, Axis360, and the cables.

    Axis360 Motor
    The Axis360 digital stepper motor provides smooth and precise movements. It can be configured to pan a camera, tilt when used with the mini tripod and L brackets,and slide when used with the slider. It supports cameras up to 11 pounds and features a 1/4"-20 mounting screw.
    Controller
    Operating using CineMoco software, the Controller is the brains behind the Axis360. It controls slow, incremental moves while firing synchronized timelapse photos, or fast fluid moves for video. The Controller works with most video cameras and can sync moves and timelapse photos on most Canon and Nikon DLSR cameras using optional cables (Canon N3, Canon E3, and Nikon DC0). A controller is required for each axis of motion control. For multi-axis moves, additional motors and controllers are needed. Controllers can be controlled individually or daisy chained together with a standard 3.5mm stereo cable for synchronized control.
    Slider
    The 32" slider features aluminum rails and a sliding platform with eight urethane coated bearing and adjustable drag. It can be moved by hand or with a belt and pulley system driven by the Axis360 motor. The slider has a center 3/8"-16 tripod mount screw and breaks down into four 16" pieces for compact travel.
    Mini Tripod
    For motorized tilt movements, a mini tripod kit with L brackets is included. Each tripod leg has six adjustable positions and threaded rubber feet for fine tuning. A 1/4"-20 threaded screw lets you attach a camera, ballhead, or motor. The two included L brackets allow you to mount the Axis360 motor and Controller to the tripod.
    Additional Features
    • Ballhead included attaching your camera to the slider or the mini tripod. It has a 1/4"-20 threaded camera screw and a 1/4"-20 mounting thread.
    • Two quick-release clamps; accept Arca-type plates and L bracket
    • Arca-type quick-release plate for balancing larger cameras or cameras with long lenses
    • Optional slider extension rails available
    UPC: 784672117715
  • 2 x Cinetics Axis360 Motor and Controller
    • How To Set Up Axis360 Pro Motorized Slider
    • How To Set Up Axis360 Controller for Pan, Tilt, and Slide
    • How To Sync Multiple Axis360 Controllers
    • Product Demo 1
    • Setting Up

    The Axis360 Motor and Controller from Cinetics lets you create dynamic video and time lapse photography sequences with fluid and precise motorized slides, pans, and tilts. It features the powerful Axis360 digital stepper motor, which proves smooth or incremental movements, and a Controller unit for running the motor. A travel bag is included for storing the Axis360 and Controller.

    The Axis360's motor drive has a 1/4"-20 threaded screw for attaching your camera or a mounting bracket. A 1/4"-20 mounting thread on the bottom of the unit is provided for mounting the motor to a tripod, slider, or other support system. The motor can be configured to pan a camera, tilt when used with a tripod and the optional Balance Kit, and slide when used with the Axis360 Pro slider's pulley system. The motor supports up to 11 pounds, making it compatible with most DLSR, mirrorless, and digital cinema cameras.

    The Controller is the brains behind the Axis360, using CineMoco software to control smooth movement and synchronized time lapse photos. The Controller works with most video cameras and can sync moves and time lapse photos on most Canon and Nikon DLSR cameras using optional cables. A built-in rechargeable battery provides six hours of continuous operation on a single charge or up to 24 hours in power save mode. In video mode, the Controller unit provides speeds up to 110° per second.

    For time lapse photography, it enables incremental movements as small as 0.03°. For multi-axis moves, additional motors and controllers are needed. Controllers can be controlled individually or daisy chained together with a standard 3.5mm stereo cable for synchronized control.

    Note: An optional shutter release cable is required to fire your camera during time lapse photography. It is important to select the right cable based on the port type on your camera.

    Key Features
    • Supports up to 11 lb
    • Get precise shots with variable speeds up to 110°/sec and accurate to 0.1°
    • 360° motorized pan or tilt allows for smooth, repeatable movements
    • Combine multiple Axis360 Motors and Controllers for 1, 2, or 3 axis movement
    • Software is open source and upgradeable
    • Compatible with Dragonframe stop motion animation software
    • Built-in rechargeable battery
    UPC: 784672117784
  • Cinetics Axis360 Pro Motorized Motion Control System and Slider
    Load Capacity Slides 11 lb (5 kg) vertically or horizontally up to 1.4 cm/s
    Travel Speed Variable speeds up to 2.4 cm/s or 110°/s, and accurate to 0.1°
    Battery Built-in rechargeable battery
    Battery Runtime 6 hours in continuous mode
    24 hours in power saving mode
    Tripod Attachment 1/4"-20 and 3/8"-16
    Camera Control Camera Cables
    N3 - Canon 1D Series, 5D Series, 6D Series, 7D, 10D, 20D, 30D, 40D, 50D
    E3 - Canon 60D, 60Da, Rebel (300D), Rebel XT (350D), Rebel XTi (400D), Rebel XSi (450D), Rebel T1i (500D), Rebel T2i (550D), Rebel T3i (600D), Rebel T4i (650D), Rebel XS (1000D), Rebel T3 (1100D), Pentax K series DSLR
    DC0 - Nikon D800, D700, D300s, D300, D200, D4, D3 series, D2 series

    Video functions do not require a camera cable, and many cameras support time-lapse with a built-in intervalometer (no camera cable necessary). The Controller controls the camera shutter with included camera cables for many Canon and Nikon cameras, and cables are available optionally for a variety of other cameras.
    Software Compatibility Compatible with Dragonframe stop motion animation software
    Rail Length 32" (81.3 cm); breaks down into four 16" (40.6 cm) sections
    Weight 10 lb (4.5 kg)
    Packaging Info
    Box Dimensions (LxWxH) 26.0 x 6.6 x 6.6"
  • 2 x Cinetics Axis360 Motor and Controller
    Load Capacity 11 lb (5 kg) vertically or horizontally, up to 1.4 cm/s
    Travel Speed Variable speeds up to 2.4 cm/s or 110°/s, 0.1° accuracy
    Interface Controller:
    1 x DC power input
    1 x Motor control port
    1 x Shutter release cable port
    1 x 3.5mm Expansion port
    1 x Micro USB port
    Battery Built-in rechargeable battery
    Battery Runtime 6 hours (continuous mode)
    24 hours (power saving mode)
    Camera Screw 1/4"-20
    Tripod Attachment 1/4"-20
    Weight 2.6 lb (1.2 kg)
    Packaging Info
    Box Dimensions (LxWxH) 7.4 x 7.3 x 5.5"
In the Box
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Delivery is approximately 9-12 days from order date. To know more click here.
 Tanotis uses Payumoney as a payment gateway, We receive the amount paid by customer only when we deliver the product.
1. You make the payment.
2. Money is held with Payumoney.
3. Money is released to us only when the product is delivered to you.