BSS Audio Soundweb London BLU-100 12x8 Signal Processor with BLU Link

Click on picture to view larger

BSS Audio Soundweb London BLU-100 12x8 Signal Processor with BLU Link

The Soundweb London BLU-100 12x8 Signal Processor with BLU Link from BSS Audio is a DSP processor designed for use in networked audio routing applications. It offers a fixed configuration...

Regular price Rs. 317,770.00 Sale price

Actual Price Rs. 397,215.00

SPECIAL OFFER TILL MIDNIGHT OF APRIL 30th FLAT 10% DISCOUNT

Coupon Code: EXPERIENCE10

Valid on selected products where you see this message. Valid for 1 order per customer. Valid on first come first serve basis for first 500 orders.

Share

The Soundweb London BLU-100 12x8 Signal Processor with BLU Link from BSS Audio is a DSP processor designed for use in networked audio routing applications. It offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.

The BLU-100 has open architecture which is fully configurable through HiQnet London Architect. A palette of processing and logic objects, and "drag and drop" method of configuration provide a simple and familiar design environment. This processor features a low latency, fault tolerant digital audio bus of 48 channels, which uses standard Category 5e cabling, giving a distance of 100 yards between compatible devices. Fiber media converters can be used to increase the distance between devices to over 24 miles. The BLU-100 is compatible with the entire Soundweb London family, and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices. Analog Inputs provide software configurable gain in 6 dB increments up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is accessible without the requirement for a PC, from the clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
  • 12 analog inputs (with 48 VAC phantom power per channel)
  • 8 analog outputs
  • Configurable signal processing
  • Rich palette of processing and logic objects
  • 48 channel, low latency, fault tolerant digital audio bus
  • Clear front panel LED Indicators
  • Bi-directional locate functionality
  • 12 control inputs and 6 logic outputs for GPIO integration
  • Soundweb London interface kit for third party control system integration (documentation)
  • HiQnet device
  • Configuration, control and monitoring from HiQnet London Architect
UPC: 691991004223
Indicators
Input Signal Present, CLIP, 48 V (Input only)
Other COM, STAT, ERR, PWR
Analog Input
Mic/Line Inputs 12x electronically balanced on Phoenix Combicon removable screw connectors
Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps
Input Impedance 3.5 kOhms
Maximum Input Level +20 dBu with 0 dB input gain,+8 dBu with 12 dB gain
CMRR >75 dB at 1 kHz
EIN <-128 dBu typical with 150 ohm source
Phantom Power 48 V nominal, selectable per input
Latency A/D Latency: 37/Fs [0.77 ms@ 48 kHz]
Analog Outputs
Outputs 8x electronically balanced on Phoenix/Combicon removable screw connectors
Maximum Output Level +19 dBu
Frequency Response 20 Hz to 20 kHz (+0.5 dB/-1 dB)
THD <0.01% 20 Hz to 20 kHz, +10 dBu output
Dynamic Range 108 dB typical, 22 Hz to 22 kHz, unweighted
Crosstalk <-75 dB
Output Impedance 40 ohms balanced and 20 ohms unbalanced
Latency D/A Latency: 29/Fs [0.60 ms@48 kHz]
Control Port
Control Ports 12 inputs and 6 outputs
Input Voltage 0 to 4.5 V
Input Impedance 2-Wire Mode: 4.7 kOhm to +5 V
3-Wire Mode: >1 Mohm
Output Voltage Logic Output Voltage: 0 or +5 V unloaded
Output Impedance Logic Output Impedance: 440 ohms
Output Current Logic Output Current: 10 mA source, 60 mA sink
Watchdog Output
Output Current Opto Output Current: 14 mA maximum
Voltage Withstanding Voltage: 80 V maximum (Off)
Impedance Series Impedance: 220 ohms (isolated)
Control Network
Connectors RJ45 Ethernet connector
Maximum Cable Length 300' (100 m) on Cat5e cable between devices
Number of Maximum Nodes 60
Latency 11/Fs [0.23 ms @48 kHz]
Pass Through Latency: 4/Fs [0.08 ms @48 kHz]
Power
Mains Voltage 100-240 V AC, 50/60 Hz
Power Consumption <55 VA
BTU <188 BTU/hour
Operating Temperature Range 41 to 95&degF (5 to 35&degC)
Dimensions & Weight
Dimensions (HxWxD) 1.75 x 19.00 x 9.00" (45 x 483 x 229 mm)
Weight 6.4 lb (2.9 kg)
Packaging Info
Package Weight 9.65 lb
Box Dimensions (LxWxH) 23.8 x 15.6 x 4.8"
In the Box
BSS Audio Soundweb London BLU-100 12x8 Signal Processor with BLU Link
  • Limited 5-Year Warranty
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Delivery is approximately 9-12 days from order date. To know more click here.
 Tanotis uses Payumoney as a payment gateway, We receive the amount paid by customer only when we deliver the product.
1. You make the payment.
2. Money is held with Payumoney.
3. Money is released to us only when the product is delivered to you.