Bescor MP-101 Motorized Pan & Tilt Head Kit with 50' Remote Extension & D-Tap Adapter

Remote Control Pan & Tilt Camera Head

D-Tap Power Adapter, 6 lb Maximum Load

Remote Control with 50' Extension Cable

Adjustable Pan/Tilt Speed

Remotely control your camera's pan and tilt motion with this MP-101 Motorized Pan & Tilt Head Kit with 50' Remote Extension & D-Tap Adapter from Bescor . The kit includes the MP-101 motorized pan and tilt head, a wired remote control, a 50' remote control extension cable, and a D-Tap power cable to power the unit via a D-Tap source.

The MP-101 features adjustable pan and tilt speeds, two 1/4"-20 tripod mounting threads, and a 1/4"-20 camera mounting screw, and it supports payloads weighing up to 6 lb. The head is controlled using the included wired remote control, and the 50' extension cable allows you to control the rig from farther away. It can be powered using separately available batteries or AC power supply, or by using a D-Tap source with the included cable.

Bescor MP-101 Motorized Pan & Tilt Head

The Bescor MP-101 Motorized Pan & Tilt Head attaches between a tripod and camera and enables remote panning and tilting of the camera. Two independent motors smoothly operate horizontal and vertical motion at adjustable speeds. The head supports payloads up to 6 lb. The two mounting points are the 1/4"-20 tripod threads underneath and the 1/4"-20 camera mounting screw with registration pin on top. All tripods and cameras are compatible.

An Auto Pan Mode allows for continuous panning motion, and a switch selector lets you assign end points at 45°, 90°, or 340°. The maximum horizontal angle is ±170 degrees, and the maximum vertical angle is ±15 degrees. This head can be powered by four AA batteries, the Bescor PS-260 AC power supply, or a Bescor 90-645 external battery, all sold separately.

• Enables panning and tilting of a camera remotely at adjustable speeds
• Attaches between a tripod and camera
• 1/4"-20 threads for tripod, 1/4"-20 screw mount for camera
• 6 lb payload
• Remote control included

UPC: 741147090010 Bescor RE-50 50' Extension Cord - for MP-101 Pan Head Remote Control

The Bescor RE-50 extension affords 50' (15.24 m) of additional separation from the MP-101 remote pan head to its remote control.

UPC: 741147090034 Bescor D-Tap Male to 2.1mm Power Cable for MP101 (5')

The 5' long D-Tap Male to 2.1mm Power Cable from Bescor connects to a D-Tap power source and allows you to power your Bescor MP101 motorized pan/tilt head. The cable is regulated, stepping down the power from 14.4 to 6 VDC accepted by the MP101.

UPC: 741147952523

Power Source	Bescor PS-260 AC power supply, Bescor 90-645 external battery, or 4 x AA batteries (All sold separately)
Payload	6 lb (2.7 kg)
Mount Types	1/4"-20 tripod mount thread, 1/4"-20 camera mount stud
Dimensions	5.8 x 4.5 x 4.0" (14.7 x 11.4 x 10.2 cm)
Weight	1.7 lb (0.8 kg)

Package Weight	2.225 lb
Box Dimensions (LxWxH)	6.45 x 5.9 x 4.4"

Package Weight	1.5 lb
Box Dimensions (LxWxH)	6.4 x 5.8 x 2.55"

Connectors	Power Input: D-Tap Male Power Output: 2.1 x 5.5 mm Coax
Cable Rating	300 Volts at 176°F / 80°C
Wire Gauge	22 AWG
Length	5' / 1.52 m
Weight	1 lb / 0.45 kg

Package Weight	0.175 lb
Box Dimensions (LxWxH)	4.4 x 2.85 x 2"

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.