{"title":"Shields","description":"","products":[{"product_id":"genuine-sparkfun-sparkfun-music-instrument-shield","title":"SparkFun Music Instrument Shield Audio, Shields, Sparkfun Originals","description":"\u003cp\u003eDo you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The SparkFun Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next Arduino project. This board is built around the VS1053 MP3 and MIDI codec IC, wired in MIDI mode. Simply connect a speaker\/stereo\/pair of headphones to the 1\/8\" stereo jack on the shied and pass the proper serial commands to the IC and you’ll be playing music in no time!\u003c\/p\u003e\n\n\u003cp\u003e The VS1053 contains two large tonebanks including various piano, woodwinds, brass, synth, SFX and percussion sounds. The shield is also capable of playing several tones simultaneously (maximum polyphony of up to 31 sounds!). Take a look at our example code to get an idea of how easy it is to add musical zest to your next Arduino gadget.\u003c\/p\u003e\n\n\u003cp\u003e In this version, we’re using a better regulator, corrected the speaker connectors, and have the reset pin pulled high. We’ve also included solder jumpers for pin 3 and 4 so they’re selectable.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/MIDI%20Music%20Shield-v13.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/MIDI%20Music%20Shield-v13.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.sparkfun.com\/tutorials\/302\"\u003eQuickstart Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/4\/9\/1\/2\/0\/512276a2ce395f9712000000.zip\"\u003eExample Code\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.sparkfun.com\/datasheets\/Components\/SMD\/vs1053.pdf\"\u003eDatasheet\u003c\/a\u003e (VS1053)\u003c\/li\u003e\n\u003cli\u003eIllumitune Project (\u003ca href=\"http:\/\/www.sparkfun.com\/tutorials\/282\"\u003etutorial\u003c\/a\u003e) (\u003ca href=\"http:\/\/vimeo.com\/26064415\"\u003evideo\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Music_Instrument_Shield\/tree\/V_H1.3_F1.1\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":19060992197,"sku":"10587:DEV-10587:spark","price":5245.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/10587-01b.jpg?v=1575978705"},{"product_id":"genuine-sparkfun-mux-shield-ii","title":"SparkFun Mux Shield II Shields","description":"\u003cp\u003eSometimes you’ve got way too many inputs, or outputs… or both. How are you going to get them all connected to your Arduino? The Mux Shield, that’s how. The Mux Shield II from Mayhew Labs is an upgrade on their previous Mux Shield which makes it possible to route up to 48 analog and digital inputs or digital outputs to and from your Arduino board.\u003c\/p\u003e\n\n\u003cp\u003e The Mux Shield II improves on the original by moving all of the I\/O pins to the end of the board, thus allowing you to add one big connector and hook up a ribbon wire or similar cable solution. This also gets the pins out of the way so that the Mux Shield can be in the middle of a stack, with a shield on top of it, and you can still get to the I\/O pins. The pins are arranged into three rows of sixteen and each row can be individually set as a digital input, a digital output or an analog input from the Arduino sketch! Further increasing the flexibility of the board, Mayhew Labs added solder jumpers to the bottom of the board that allow you to shut off this software control feature and “hard wire” the functionality of each row, freeing up the associated Arduino pins for other shields in the stack.\u003c\/p\u003e\n\n\u003cp\u003e The Mux Shield uses TI 74HC4067 analog multiplexers (mux?s) for input functionality and TI 74HC595 shift registers for output functionality. Don’t worry if that’s jibberish to you, the included Arduino library wraps it up and makes it very easy-to-use.\u003c\/p\u003e\n\n\u003cp\u003e The shield comes without any headers so be sure to pick up some stackable shield headers!\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eControl up to 48 Pins from your Arduino!\u003c\/li\u003e\n\u003cli\u003eMultiple modes:\n\n\u003cul\u003e\n\u003cli\u003eAnalog Input\u003c\/li\u003e\n\u003cli\u003eDigital Input\u003c\/li\u003e\n\u003cli\u003eDigital Output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSolder Jumpers for Hard-Wired Mode Select\u003c\/li\u003e\n\u003cli\u003eArduino Library and Example Code Available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/Mux_Shield_II_User_Guide.pdf\"\u003eUser Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/Mux_Shield_II_Rev0%20Schematic.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.sparkfun.com\/datasheets\/IC\/CD74HC4067.pdf\"\u003eDatasheet\u003c\/a\u003e (74HC4067)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.sparkfun.com\/datasheets\/IC\/SN74HC595.pdf\"\u003eDatasheet\u003c\/a\u003e (74HC595)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/MuxShield.zip\"\u003eArduino Library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cp\u003e\u003cstrong\u003eReplaces:\u003c\/strong\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/products\/9832\"\u003eDEV-09832\u003c\/a\u003e\u003c\/p\u003e","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":19061481669,"sku":"11723:DEV-11723:spark","price":4430.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/11723-01.jpg?v=1575978721"},{"product_id":"genuine-sparkfun-sparkfun-mp3-player-shield","title":"SparkFun MP3 Player Shield Shields, Sparkfun Originals","description":"\u003cp\u003eThe SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. With this board you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield utilizes the \u003ca href=\"http:\/\/www.sparkfun.com\/products\/8892\"\u003eVS1053B\u003c\/a\u003e MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis\/MP3\/AAC\/WMA\/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.\u003c\/p\u003e\n\n\u003cp\u003e The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1\" pitch header.\u003c\/p\u003e\n\n\u003cp\u003e This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed. We recommend the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/11417\"\u003eArduino R3 Stackable Header Kit\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e3.5mm audio out jack\u003c\/li\u003e\n\u003cli\u003e0.1\" spaced header for speaker out\u003c\/li\u003e\n\u003cli\u003emicroSD card slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/MP3%20Shield_v15.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/MP3%20Shield_v15.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/VS1053B.pdf\"\u003eDatasheet\u003c\/a\u003e (VS1053B)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/mp3-player-shield-hookup-guide-v15\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/MP3_Player_Shield\/tree\/V_1.5\"\u003eGitHub\u003c\/a\u003e (Design Files, Library, \u0026amp; Example Code)\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":19062276357,"sku":"12660:DEV-12660:spark","price":5310.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/12660-01a.jpg?v=1575978740"},{"product_id":"genuine-sparkfun-sparkfun-microsd-shield","title":"SparkFun microSD Shield Shields, Sparkfun Originals","description":"\u003cp\u003eRunning out of memory space in your Arduino project? The SparkFun microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects.\u003c\/p\u003e\n\n\u003cp\u003e Communication with microSD cards is achieved over an SPI interface. The SCK, DI, and DO pins of the microSD socket are broken out to the ATmega168\/328’s standard SPI pins (digital 11-13), while the CS pin is broken out to Arduino’s D8 pin. If you decide to use one of the many open source FAT libraries (like FAT16 or SDFat) make sure to change the code to reflect the location of the CS pin.\u003c\/p\u003e\n\n\u003cp\u003e Most libraries assume the CS pin is connected to D10; this will have to be changed to D8. Also for the libraries to work pin D8 will have to be set as an output in the ‘setup()’ section of your sketch. The shield also includes a large prototyping area with a 13x12 grid of 0.1\" pitch PTHs.\u003c\/p\u003e\n\n\u003cp\u003e This shield comes populated with a microSD socket, red power indicator LED, and a reset button; but it does not come with headers installed. We recommend the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/11417\"\u003eArduino R3 Stackable Header Kit\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/microSD_Shield_v14.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/microSD_Shield_v14.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/microsd-shield-and-sd-breakout-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/arduino.cc\/en\/Reference\/SD\"\u003eSD Library\u003c\/a\u003e (FAT16 and FAT32)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/microSD_Shield\/blob\/V_1.4\/Firmware\/SD_Datalogger\/SD_Datalogger.ino\"\u003eExample Sketch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/microSD_Shield\/tree\/V_1.4\"\u003eGitHub\u003c\/a\u003e (Design Files \u0026amp; Example Code)\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":19062468357,"sku":"12761:DEV-12761:spark","price":2400.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/12761-05.jpg?v=1575978742"},{"product_id":"genuine-sparkfun-sparkfun-spectrum-shield","title":"SparkFun Spectrum Shield Shields, Sparkfun Originals","description":"\u003cp\u003eThe Spectrum Shield enables your Arduino with the capability of splitting a stereo audio input into 7-bands per channel. You can then read the amplitude of each channel using the ADC on your Arduino allowing you to control everything from LEDs to motors, pumps to relays, or even fire, all with sound. With this shield you will be able to have almost any project be able to react to music or sound!\u003c\/p\u003e\n\n\u003cp\u003eThe Spectrum Shield features the MSGEQ7 graphic equalizer display filter. Two of these ICs allow you to split a stereo audio input into 7-bands (per channel) and read the amplitude of each using the ADC on your Arduino. The shield is populated with two 1\/8\" stereo jacks (like you would find on a pair of headphones). One serves as a stereo input and the other is a pass-through output which allows you to connect the Spectrum Shield in-line between your audio source and your stereo system without interruption. This revision of the Spectrum Shield has been updated to the Arduino R3 layout but still requires you to solder on your own headers (check the \u003cem\u003eRecommended Products\u003c\/em\u003e section below). This shield can be used to create sound visualizers, detect patterns in music or add sound activation to your microcontroller projects.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThis product is a collaboration with Ben Moyes of Bliptronics. A portion of each sales goes back to them for product support and continued development.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/Spectrum_Shield_v16.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/Spectrum_Shield_v16.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/spectrum-shield-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/MSGEQ7_5-11.pdf\"\u003eDatasheet\u003c\/a\u003e (MSGEQ7)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/Spectrum_Shield\/tree\/HW_1.6_FW_1.1\"\u003eGitHub\u003c\/a\u003e (Example Code \u0026amp; Design Files)\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":19062707589,"sku":"13116:DEV-13116:spark","price":4050.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/13116-01a.jpg?v=1575978749"},{"product_id":"genuine-sparkfun-can-bus-shield","title":"SparkFun CAN-BUS Shield Shields, Sparkfun Originals","description":"\u003cp\u003eThe CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output it to a screen to make an in-dash project.\u003c\/p\u003e\n\n\u003cp\u003eIt uses the Microchip MCP2515 CAN controller with the MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBD-II cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM506 GPS module. These features make this shield ideal for data logging application.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A DS9 Cable is not included with this shield. Please be sure to check \u003cem\u003eRecommended Products\u003c\/em\u003e section below for a recommended cable to use with this board.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product is a collaboration with SK Pang Electronics. A portion of each sales goes back to them for product support and continued development.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eCAN v2.0B up to 1 Mb\/s\u003c\/li\u003e\n\u003cli\u003eHigh speed SPI Interface (10 MHz)\u003c\/li\u003e\n\u003cli\u003eStandard and extended data and remote frames\u003c\/li\u003e\n\u003cli\u003eCAN connection via standard 9-way sub-D connector\u003c\/li\u003e\n\u003cli\u003ePower can supply to Arduino by sub-D via resettable fuse and reverse polarity protection.\u003c\/li\u003e\n\u003cli\u003eSocket for EM506 GPS module\u003c\/li\u003e\n\u003cli\u003eMicro SD card holder\u003c\/li\u003e\n\u003cli\u003eConnector for serial LCD\u003c\/li\u003e\n\u003cli\u003eReset button\u003c\/li\u003e\n\u003cli\u003eJoystick control menu navigation control\u003c\/li\u003e\n\u003cli\u003eTwo LED indicator\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/SparkFun_CAN-Bus_Shield_v13a.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/Can_Bus_v13.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.sparkfun.com\/datasheets\/DevTools\/Arduino\/MCP2515.pdf\"\u003eDatasheet \u003c\/a\u003e(MCP2515)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.sparkfun.com\/datasheets\/DevTools\/Arduino\/MCP2551.pdf\"\u003eDatasheet \u003c\/a\u003e(MCP2551)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/can-bus-shield-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-obd-ii\"\u003eOBD-II Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/CAN-Bus_Shield\/tree\/V_H1.3_L5.0.0\"\u003eGitHub\u003c\/a\u003e (Design Files)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_CAN-Bus_Arduino_Library\"\u003eGitHub\u003c\/a\u003e (Library \u0026amp; Example Code)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/videos#all\/ui4GW-wO2nk\/77\"\u003eProduct Video\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":19062796485,"sku":"13262:DEV-13262:spark","price":4720.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/13262-01.jpg?v=1575978752"},{"product_id":"sparkfun-sparkfun-ardumoto-motor-driver-shield","title":"SparkFun SparkFun Ardumoto - Motor Driver Shield","description":"\u003cp\u003eThe Ardumoto Shield is a dual-motor controller for Arduino. Based on the L298 H-bridge, the SparkFun Ardumoto can drive two DC motors up to 2A per channel. Combined with an Arduino, the Ardumoto makes a fantastic controller platform for RC vehicles or even small autonomous robots. It�s now easier to use, featuring control signal LEDs, while also being much more flexible for advanced users.\u003c\/p\u003e \u003cp\u003eThe board takes its power from the same Vin line as the Arduino board and includes blue and yellow LEDs to indicate active direction. All driver lines are diode protected from back EMF. The L298 is a two-channel motor driver, which means it can individually drive up to two motors, making it perfect for a two-wheel-drive vehicle. Each channel on the L298 can deliver up to 2A to the motor to which it�s connected. Keep in mind, though, that the amount of current available to your motor also depends on your system�s power source.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Ardumoto does not include \u003ca href=\"https:\/\/www.sparkfun.com\/products\/8084\"\u003escrew terminals\u003c\/a\u003e or \u003ca href=\"https:\/\/www.sparkfun.com\/products\/10007\"\u003estackable headers\u003c\/a\u003e; you will need to purchase both separately. You can find them in the aforementioned links or in the \u003cem\u003eRecommended Products\u003c\/em\u003e below.\u003c\/p\u003e \u003cp style=\"text-align:center;\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/ardumoto-kit-hookup-guide\" class=\"btn btn-default\"\u003eGet Started with the SparkFun Ardumoto Guide\u003c\/a\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/M02g9dDLh8Y\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Robotics\/SparkFun_Ardumoto_v20.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Robotics\/SparkFun_Ardumoto_v20.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/ardumoto-kit-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"http:\/\/www.sparkfun.com\/datasheets\/Robotics\/L298_H_Bridge.pdf\"\u003eDatasheet\u003c\/a\u003e (L298)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Ardumoto-Motor_Driver_Shield\/tree\/revision\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":42402316176,"sku":"14129:DEV-14129:spark","price":3370.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/14129-01.jpg?v=1576002825"},{"product_id":"sparkfun-sparkfun-ardumoto-shield-kit","title":"SparkFun SparkFun Ardumoto Shield Kit","description":"\u003cp\u003eRobots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, as well as pairs of tires, motors, connectors and wires. And, of course, it�s all stuffed in a classic SparkFun red box (which may come in handy as a robot chassis).\u003c\/p\u003e \u003cp\u003eThe Ardumoto Shield is an easy-to-use dual-motor controller for Arduino. Combined with an Arduino, the Ardumoto makes a fantastic controller platform for RC vehicles or even small autonomous robots. At the heart of the Ardumoto — the big, black chip right in the middle — is an L298, one of our favorite dual-channel motor drivers around, capable of driving up to 2A per channel. The board takes its power from the same Vin line as the Arduino board and includes blue and yellow LEDs to indicate active direction. All driver lines are diode protected from back EMF.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The motors included with this kit are not compatible with the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/12629\"\u003eWheel Encoder kit\u003c\/a\u003e. Sorry for the inconvenience.\u003c\/p\u003e \u003cp style=\"text-align:center;\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/ardumoto-kit-hookup-guide\" class=\"btn btn-default\"\u003eGet Started with the SparkFun Ardumoto Kit Guide\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e\u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/M02g9dDLh8Y\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e  \u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/14129\"\u003eSparkFun Ardumoto Shield\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e2x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/13258\"\u003eHobby Gearmotor – 65 RPM\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e2x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/13259\"\u003eWheel – 65mm (Rubber Tire)\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/10007\"\u003eArduino Stackable Header Kit\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e3x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/8084\"\u003eScrew Terminals 3.5mm Pitch (2-Pin)\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/9518\"\u003e9V to Barrel Jack Adapter\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e2x Black Wire – 5\" Length (22AWG Solid Core)\u003c\/li\u003e \u003cli\u003e2x Red Wire – 5\" Length (22AWG Solid Core)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Robotics\/SparkFun_Ardumoto_v20.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Robotics\/SparkFun_Ardumoto_v20.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/ardumoto-kit-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/L298_H_Bridge.pdf\"\u003eDatasheet\u003c\/a\u003e (L298)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Ardumoto-Motor_Driver_Shield\/tree\/revision\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":42402358672,"sku":"14180:KIT-14180:spark","price":4795.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/14180_Kit.jpg?v=1576002832"},{"product_id":"sparkfun-sparkfun-mini-gps-shield","title":"SparkFun SparkFun Mini GPS Shield","description":"\u003cp\u003eThe SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripherals you’ll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger. The shield is based around the \u003ca href=\"https:\/\/www.sparkfun.com\/products\/13670\"\u003eGP-735\u003c\/a\u003e GPS module, a 56-channel GPS receiver featuring a uBlox 7th generation chip set and an up to 10Hz update rate. The board also uses a level shifter, so there�s no need to worry about the logic voltage of your Arduino Mini.\u003c\/p\u003e \u003cp\u003eThe Mini GPS Shield is a mini version of our \u003ca href=\"https:\/\/www.sparkfun.com\/products\/13750\"\u003eGPS Logger Shield\u003c\/a\u003e. While the GPS Logger Shield was designed to work with the Arduino RedBoard, the Mini GPS Shield was designed to work with the Arduino Mini\/Micro boards.\u003c\/p\u003e \u003cp\u003eThe shield comes with a 6-pin JST connector to connect the GP-735 module. If you already have a GPS module, the JST pins are broken out and labeled to allow you to use just about any GPS module that works down to 3.3V. The Mini GPS Shield will work with any of our Arduino Mini boards. The board uses 3.3V logic; however, the logic level converter on the shield allows you to use 5V boards just as easily. The mini boards have symmetrical pins, which means it�s very easy to plug the shield in the wrong way. Plugging the shield in backward won�t damage either board, but it is something that could be easy to overlook. Make sure to check out the \u003cem\u003eHookup Guide\u003c\/em\u003e below for proper installation instructions.\u003c\/p\u003e \u003cp style=\"text-align:center;\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/mini-gps-shield-hookup-guide\" class=\"btn btn-default\"\u003eGet Started with the Mini GPS Shield Guide\u003c\/a\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/k-El0U8HFlg\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSupports GP-735 with pins broken out to support most 3.3V tolerant GPS modules\u003c\/li\u003e \u003cli\u003eSupports backup battery options\u003c\/li\u003e \u003cli\u003euSD memory card socket\u003c\/li\u003e \u003cli\u003eWorks with any Arduino Mini board (3.3V or 5V)\u003c\/li\u003e \u003cli\u003eUART switch controls serial communications\u003c\/li\u003e \u003cli\u003eConfigurable LED to show GPS fix\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/SparkFun_Mini_GPS_Shield.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/SparkFun_Mini_GPS_Shield.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/mini-gps-shield-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Mini_GPS_Shield\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":42402362832,"sku":"14030:GPS-14030:spark","price":1515.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/14030-01.jpg?v=1576002833"},{"product_id":"sparkfun-sparkfun-wireless-motor-driver-shield","title":"SparkFun SparkFun Wireless Motor Driver Shield","description":"\u003cp\u003eThe SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield is the Toshiba TB6612FNG H-Bridge Motor Driver, which allows the shield to control two DC motors at once, both CW and CCW, and to brake electronically. The TB6612FNG H-Bridge is rated up to 1.2A per channel at 13V, which means it will drive a fair variety of hobby motors ranging in power. Each of the GPIO pins is broken out on a �servo-style� header field with PWR and GND to allow you to easily connect devices using a 3-pin servo cable.\u003c\/p\u003e \u003cp\u003eUsing the onboard slide switches, the motor power and servo power rail can be connected to the Arduino’s regulated voltage, VIN, or a completely separate power supply attached to the shield’s barrel jack. This feature makes the SparkFun Wireless Motor Driver Shield ideal if you are connecting multiple servos and need more than 5V to your robotics project!\u003c\/p\u003e \u003cp\u003eThis shield also includes an I\u003csup\u003e2\u003c\/sup\u003eC pin-out and a built-in XBee socket, making it perfect for setting up an XBee-based remote control. Simply plug an XBee module into the socket on the shield, and you have the control system for a simple remote control rover or small autonomous robot!\u003c\/p\u003e \u003cp style=\"text-align:center;\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/wireless-motor-driver-shield-hookup-guide\" class=\"btn btn-default\"\u003eGet Started with the Wireless Motor Driver Shield Guide\u003c\/a\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/wRkz16DvjHQ\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTB6612FNG H-Bridge Motor Driver\u003c\/li\u003e \u003cli\u003eXBee Socket\u003c\/li\u003e \u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC Header\u003c\/li\u003e \u003cli\u003eArduino R3 Layout\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/parts\/1\/2\/2\/4\/3\/Wireless_Motor_Driver_Shield.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/parts\/1\/2\/2\/4\/3\/Wireless_Motor_Driver_Shield.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/wireless-motor-driver-shield-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Robotics\/TB6612FNG.pdf\"\u003eDatasheet\u003c\/a\u003e (TB6612FNG)\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Wireless_Motor_Driver_Shield\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":42402363600,"sku":"14285:DEV-14285:spark","price":3540.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/14285-01.jpg?v=1576002833"},{"product_id":"sparkfun-sparkfun-weather-shield","title":"SparkFun SparkFun Weather Shield","description":"\u003cp\u003eThe SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing.\u003c\/p\u003e \u003cp\u003eThe Weather Shield utilizes the Si7021 humidity\/temperature sensor, the MPL3115A2 barometric pressure sensor and the ALS-PT19 light sensor. The shield relies on the Si7021 and MPL3115A2 Arduino libraries.\u003c\/p\u003e \u003cp\u003eEach shield comes with two unpopulated RJ11 connector spaces (for optional hookup of rain and wind sensors) and a 6-pin GPS connector (for optional hookup of a GP635T GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built-in voltage regulators and signal translators.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Weather Shield comes as a stand-alone board. Headers, connectors and additional sensors will need to be purchased separately; check the Wish List below or the Recommended Products on this page.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This shield was designed for the SparkFun RedBoard and Arduino Uno and will not work with other boards (like the Arduino Yun, for example) without modification.\u003c\/p\u003e \u003cp style=\"text-align:center;\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/arduino-weather-shield-hookup-guide-v12\" class=\"btn btn-default\"\u003eGet Started with the SparkFun Weather Shield Guide\u003c\/a\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/G_dIHJWV-Yc\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHumidity\/Temperature Sensor — Si7021\u003c\/li\u003e \u003cli\u003eBarometric Pressure — MPL3115A2\u003c\/li\u003e \u003cli\u003eLight Sensor — ALS-PT19\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/Weather%20Shield_V12.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Dev\/Arduino\/Shields\/Weather%20Shield_V12.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/arduino-weather-shield-hookup-guide-v12\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/weather-station-wirelessly-connected-to-wunderground\"\u003eWeather Station Tutorial\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003eDatasheets \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Weather\/Si7021.pdf\"\u003eSi7021\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Sensors\/Pressure\/MPL3115A2.pdf\"\u003eMPL3115A2\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"http:\/\/cdn.sparkfun.com\/datasheets\/Components\/General%20IC\/ALS-PT19-315C-L177-TR_datasheet.pdf\"\u003eALS-PT19\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e\u003ca href=\"http:\/\/sfe.io\/w75585\"\u003eWish List\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Weather_Shield\/tree\/V12\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":42402394640,"sku":"13956:DEV-13956:spark","price":5640.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/13956-01.jpg?v=1576002834"},{"product_id":"sparkfun-qwiic-shield-for-arduino-1","title":"SparkFun Qwiic Shield for Arduino","description":"\u003cp\u003eThe SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield connects the I\u003csup\u003e2\u003c\/sup\u003eC bus on your Arduino to a series of SparkFun Qwiic connectors and provides the circuitry to convert the 5V given to the 3.3V required by I\u003csup\u003e2\u003c\/sup\u003eC boards in our Qwiic system. As long as your devices are on different addresses, the Qwiic system allows for daisy chaining, meaning you can stack as many sensors as you�d like to create a tower of sensing power!\u003c\/p\u003e \u003cp\u003eThe Qwiic Shield has four Qwiic connection ports, all on the same I\u003csup\u003e2\u003c\/sup\u003eC bus, as well as a large prototyping area to design and make your own unique circuits. The shield also has a few 3-by-1 rails to help with prototyping, as well as buses for ground, 5V and even 3.3V. We have included four mounting ports in the same design as our Qwiic sensors, allowing you to affix your small board to the top of the shield.\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003cem\u003eThe SparkFun Qwiic Connect System is an ecosystem of I\u003csup\u003e2\u003c\/sup\u003eC sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can�t hook it up wrong.\u003c\/em\u003e\u003c\/p\u003e \u003chr\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This includes R3 Arduino headers, but they are not pre-soldered onto the board, so some assembly will be required when putting the shield together.\u003c\/p\u003e \u003cp style=\"text-align:center;\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/qwiic-shield-for-arduino--photon-hookup-guide\" class=\"btn btn-default\"\u003eGet Started with the SparkFun Qwiic Shield for Arduino Guide\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x SparkFun Qwiic Shield for Arduino\u003c\/li\u003e \u003cli\u003e1x Arduino Stackable Header Kit – R3\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e4x Qwiic Connection Ports\u003c\/li\u003e \u003cli\u003eLarge Prototyping Area\u003c\/li\u003e \u003cli\u003e3-by-1 Prototyping Rails\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/1\/a\/3\/b\/Qwiic_Shield_for_Arduino_v10.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/c\/0\/0\/d\/Qwiic_Shield_for_Arduino_v10_1.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eQwiic Landing Page\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/qwiic-shield-for-arduino--photon-hookup-guide\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_Shield_for_Arduino\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Rw3IHsx46aM\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/1_sCORfFJRI\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cbr\u003eAll product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":617822257168,"sku":"14352:DEV-14352:spark","price":935.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/14352-01.jpg?v=1576004887"},{"product_id":"sparkfun-arduino-protoshield-bare-pcb","title":"SparkFun Arduino ProtoShield - Bare PCB","description":"\u003cp\u003eThe SparkFun Arduino ProtoShield is a bare PCB with no attached or included parts that lets you customize your own Arduino shield using whatever circuit you can come up with! You will even be able to test your circuit or project to make sure everything is working the way it should! The SparkFun Arduino ProtoShield is based off the Arduino R3�s footprint that allows you to easily incorporate it with favorite Arduino-based device.\u003c\/p\u003e \u003cp\u003eNow you don’t need to buy the whole ProtoShield kit if you just need a piece of prototyping board that will fit on top of your Arduino. You might want to grab a stackable header kit, though, which you can find in the related items below.\u003c\/p\u003e \u003cp\u003eOne of our favorite features with this version of the Arduino ProtoShield is the solderable-like breadboard prototyping area! Half of this area was designed with a breadboard in mind. On the underside of the shield you will be able to see open jumper pads between each through hole to make a connection like a breadboard. Once you add a component, simply add a solder jumper between holes to make a connection. For those that prefer the standard prototyping pads, we left the other side (near the BlueSMiRF and Serial UART ports) as is.\u003c\/p\u003e \u003cp\u003eWe have also moved the prototype testing components (those used to make sure your circuit works effectively) off of the “mainland” of the shield and onto a ProtoSnap styled, removable PCB. On this test area you will find soldering areas for two 3mm LEDs (as well as pins to control and power them), two 330 Ohm resistors, a 10K Ohm resistor, and a pushbutton. These items you’ll need to purchase separately.\u003c\/p\u003e \u003cp style=\"text-align:center;\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-arduino-protoshield-hookup-guide\" class=\"btn btn-default\"\u003eGet Started With the SparkFun Arduino ProtoShield Guide\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eArduino R3 Footprint\u003c\/li\u003e \u003cli\u003eSolderable-Like Breadboard\u003c\/li\u003e \u003cli\u003eBlueSMiRF or Comparable 6-pin Pins\u003c\/li\u003e \u003cli\u003eDetachable Test Area\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/5\/a\/f\/6\/SparkFun_ProtoShield_Kit_rev40.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/0\/8\/d\/5\/b\/SparkFun_ProtoShield_Kit_rev40.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-arduino-protoshield-hookup-guide\"\u003eHookup and Assembly Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Arduino_ProtoShield_Bare_PCB\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/3VJPLWdjUGM\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cbr\u003eAll product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":12539920023637,"sku":"13819:DEV-13819:spark","price":930.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/13819-SparkFun_ProtoShield-01.jpg?v=1576006181"},{"product_id":"sparkfun-protoshield-kit","title":"SparkFun ProtoShield Kit","description":"\u003cp\u003eThe SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to make sure everything is working the way it should! The SparkFun ProtoShield Kit is based off the Arduino R3�s footprint that allows you to easily incorporate it with favorite Arduino-based device.\u003c\/p\u003e \u003cp\u003eOne of our favorite features with this version of the ProtoShield Kit is the solderable-like breadboard prototyping area! Half of this area was designed with a breadboard in mind. On the underside of the shield you will be able to see open jumper pads between each through hole to make a connection like a breadboard. Once you add a component, simply add a solder jumper between holes to make a connection. For those that prefer the standard prototyping pads, we left the other side (near the BlueSMiRF and Serial UART ports) as is.\u003c\/p\u003e \u003cp\u003eWe have also moved the prototype testing components (those used to make sure your circuit works effectively) off of the “mainland” of the shield and onto a ProtoSnap styled, removable PCB. On this test area you will find soldering areas for the two yellow 3mm LEDs (as well as pins to control and power them), two 330 Ohm resistors, a 10K Ohm resistor, and a pushbutton.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Since this product is a kit, assembly and a basic knowledge of soldering will be required. The SparkFun ProtoShield Kit does not come pre-assembled.\u003c\/p\u003e \u003cp style=\"text-align:center;\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-arduino-protoshield-hookup-guide\" class=\"btn btn-default\"\u003eGet Started With the SparkFun ProtoShield Kit Guide\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/13819\"\u003eSparkFun Arduino ProtoShield - Bare PCB\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/11417\"\u003eArduino Stackable Header Kit - R3\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e2x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/532\"\u003eLED - Basic Yellow 3mm\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e2x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/97\"\u003eMini Pushbutton Switch\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e2x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/8377\"\u003eResistor 330 Ohm 1\/6th Watt PTH\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003e1x \u003ca href=\"https:\/\/www.sparkfun.com\/products\/8374\"\u003eResistor 10k Ohm 1\/6th Watt PTH\u003c\/a\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eArduino R3 Footprint\u003c\/li\u003e \u003cli\u003eSoldering Kit\u003c\/li\u003e \u003cli\u003eSolderable-Like Breadboard\u003c\/li\u003e \u003cli\u003eBlueSMiRF or Comparable 6-pin Pins\u003c\/li\u003e \u003cli\u003eDetachable Test Area\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eDocuments:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/5\/a\/f\/6\/SparkFun_ProtoShield_Kit_rev40.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/0\/8\/d\/5\/b\/SparkFun_ProtoShield_Kit_rev40.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-arduino-protoshield-hookup-guide\"\u003eHookup and Assembly Guide\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Arduino_ProtoShield_Bare_PCB\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eVideos\u003c\/strong\u003e\u003c\/p\u003e \u003cdiv class=\"flex-video-wrap clearfix\"\u003e \u003cdiv class=\"flex-video widescreen img\"\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/3VJPLWdjUGM\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" frameborder=\"0\" allowfullscreen width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cbr\u003eAll product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.","brand":"sparkfun-10","offers":[{"title":"Default Title","offer_id":12539923202133,"sku":"13820:DEV-13820:spark","price":2195.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1034\/1611\/products\/13820-SparkFun_ProtoShield_Kit-01.jpg?v=1576006184"}],"url":"https:\/\/www.tanotis.com\/collections\/shields.oembed","provider":"Tanotis","version":"1.0","type":"link"}