ANALOG DEVICES ADM3095EBRZ RS485 Transceiver, 2.5Mbps, Idle, Open, Short, 3 to 5.5V, -40°C to 125°C, NSOIC-16

ADM3095EBRZ is a level 4 EMC protected RS-485 transceiver with full ±42V fault protection. This device is designed to withstand overvoltage faults, such as short circuits directly to power supplies, and overvoltage faults, such as ±24V AC supplies connected in error to the RS-485 A and B bus pins. It is an RS-485 transceiver that integrates IEC 61000-4-5 Level 4 surge protection, allowing upto ±4kV protection on the RS-485 bus pins. This device has IEC 61000-4-4 Level 4 electrical fast transient (EFT) protection of up to ±2kV, and IEC 61000-4-2 Level 4 electrostatic discharge (ESD) protection on the bus pins, allowing the device to withstand up to ±15KV on the transceiver interface pins without latch-up or damage. It is used in applications such as heating ventilation and air conditioning (HVAC) networks, industrial field buses, building automation, and utility networks.

• Certified IEC 61000-4-6 conducted RF immunity (10V/m rms)
• 3V to 5.5V operating voltage range on VCC, 1.62V to 5.5V VIO logic supply
• PROFIBUS compliant at 4.5V VCC, receiver short-circuit, open-circuit, and floating input fail-safe
• Glitch free power-up and power-down (hot swap)
• Data rate is 2.5Mbps maximum at (VCC = 3.0V to 5.5V)
• Propagation delay (driver) is 35ns typical at (RLDIFF = 54 ohm, CL1 = CL2 = 100pF)
• Rise/fall time (driver) is 40ns typical at (RLDIFF = 54 ohm, CL1 = CL2 = 100pF)
• Input resistance (receiver) is 96Kohm minimum at (-25V ? VCM ? +25V)
• Logic input current is ±1µA maximum at (VCC = 3.0V to 5.5V)
• Operating temperature range from -40°C to +125°C, 16-lead SOIC-N package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party